New products

The Jonard Tools TK-184 Fiber Optic Connector Clean and Prep Kit offer cleaning and preparation products for use on 1.25 mm and 2.5 mm connector end-faces and bulkhead adapters.  Features • Fiber Stripper strips the 1.6-3 mm fiber jacket, 600-900 micron buffer coating, and 250 micron cable down to expose the 125 micron glass fiber • Fiber Cleaver cleaves either 900 µm buffered or 250 µm coated fiber, the precision fiber cleaver provides a perfect cleave preparing fiber for fusion splicing • Wet Wipes made with a nonabrasive residue-free 91% isopropyl alcohol solvent for cleaning the end-faces quickly and easily • Visual Fault Locator identifies breakpoints, leaks, poor connections, and stress points in fiber optic cable • Enclosed in our H-20 Rugged Nylon Carrying Case for safety and convenience   Kit includes • JIC-375 Fiber Optic Stripper, Three Hole • FC-500 Precision Fiber Cleaver • FW-50 Fiber Wipes, Wet (Pack of 50) • H-20 Rugged Carrying Case • VFL-25 Visual Fault Locator
Designed to perform live testing with OLT equipment, this PON Power Meter is perfect for use during FTTx/PON service tune-up or maintenance. It is able to simultaneously test and measure the signal power of voice, data, and video connections, and is essential for the construction and maintenance of PON systems.  Features • Analyzes voice, data, and video signals in BPON/EPON/GPON FTTx systems • Concurrently measures 1310 nm, 1490 nm, and 1550 nm wavelengths anywhere in the network • Three pass, warning, and fail LED indicators to allow you to quickly assess your network's power level • Supports 1310 nm Upstream Burst Signal and 1490/1550 nm Downstream Signal Measurements • USB port allows quick transfer of data, and up to 1,000 measurement items can be saved at once • Optional 10 minute auto-off can be activated or deactivated • Shatter-resistant sleeve protects it from accidental falls or other damage • Included software allows you to set the thresholds, transfer data, and calibrate the wavelength from your PC   Specifications • Network Types:  BPON/EPON/GPON • Connector Types:  FC/SC • Wavelengths:  1310 nm, 1490 nm, 1550 nm • Measurement Range:  -40 dBm~+10 dBm @ 1310/1490 nm, -40~+20 dBm @ 1550 nm • Max Output Power:  15 dBm @ 1310/1490 nm, 25 dBm @ 1550 nm • Detector Type:  InGaAs • Connatural Uncertainty (dB):  ±0.5 dB • Linearity (dB):  ±0.1 dB • Batteries:  (3) 1.5V AA  
Designed for use on Rollable or Spyder type ribbon fiber optic cables, this tool is perfect for separating the matrix of fibers in ribbon fiber optic cables quickly and easily.  Features • Can be used on Rollable or Spyder type ribbon fiber optic cables that contain up to 24 optical fibers each • Coil spring applies a set amount of pressure, keeping the fibers safe while being separated • Compact lightweight design is perfect for storage or on-the-go use   Specifications Cable Type:  Rollable or Spyder Ribbon Fiber No. of Fibers:  2 - 24 Length:  4.09" (10.4 cm) Weight:  0.044 lb (19.96 g)
This kit provides all the necessary tools for cutting, crimping and terminating cat5 and cat5e network cables. • Ratchting modular crimping tool for use on RJ45 regular and pass-through connectors. Also works on RJ11 and RJ22 regular connectors. • Punch Down tool with durable 110 type blade for wire termination • Ergonomic Electrician scissors for added comfort • Jacket stripper for removing cable jackets • RJ45 CAT5/5e pass-through connectors (50 pcs) • Carry case for holding tools and connectors in one place Kit includes • EPD-914 Punchdown Tool without Blade • EPB-110 Punchdown Blade, 110 With & Without Cutter • RJ45-550 RJ45 CAT5e Pass-Through Connectors (Pack of 50) • CST-1i Cyclops Wire Stripper • H-20 Rugged Carrying Case • ES-1964ERG Ergonomic Electrician's Scissors • UC-4569 RJ11/12, RJ45 Pass-through Modular Crimping Tool
Armored Mid Span Cable Slitting Tool (8 mm - 28.6 mm) The Jonard Tools Armored Mid Span Cable Slit & Ring Tool is the ultimate tool for gaining mid-span access to armored or thick jacketed cables 4 mm-28.6 mm (0.157”-1.125”) in diameter.  Features • Adjustable blade depth up to 5.5 mm (0.216”) • Precision steel blade will cut through the toughest materials, ensuring no damage to the internal fibers • Blade can be set to be longitudinal for slitting or radial for ringing • For use on cables 4 mm-28.6 mm (0.157”-1.125”) in diameter • Aluminum shaft provides tremendous stability while slitting or ringing, preventing spiraling from occurring • Shaft housing acts as a handle, providing greater leverage while slitting for convenience while ringing • Thumb screw allows blade depth to be adjusted quickly by hand • Rugged anodized aluminum and steel construction for maximum durability   Specifications Cut Type:               Slit, Ring Cable Type:           Armored, Jacket Cable Diameter:   4 mm - 28.6 mm Length:                  7.25" Weight:                  0.739
Introducing the new MSAT 16, an exciting new solution designed to easily size and access fibers in loose tube cables ranging from 1 to 3 mm diameters in mid-span applications. Features • Safe, compact & ergonomic design fits comfortably in hand for easy operation without risk of injury. • 16 unique diameter settings accommodate loose tubes ranging from 1 mm to 3 mm. • Convenient built-in sizing channels quickly determine proper setting for a wide variety of loose tube cables. • Patent-pending design features a self-aligning, easy-to-load buffer tube channel that supports & guides the tube through precision shaving operation. • Rugged polymer construction is lightweight & durable. • Spring-loaded design eliminates need to lock or clamp tool while in use. •Fixed stainless steel blades require no adjustments and replace easily.   Compatibility • Buffer Tube Diameter 0.039″ - 0.118″ (1.0 - 3.0 mm)  
Water Cooler (1-gal)
Rubbermaid / Gott
1-Gallon water cooler. • Drip-resistant spigot. • Leak-resistant screw-on lid. • Insulated to keep water or beverage cold. • White lid for best sun reflection.
The SHAX® 6100 Heavy-Duty Work Umbrella provides fast and portable relief from the elements to increase worker productivity and reduce weather-related delays. Engineered with a powder-coated steel frame, a reinforced weather-proof canopy and 300 denier polyester material, this lightweight umbrella is built to last. The unique tilt-top feature allows users to shade themselves from ultraviolet (UV) sun rays any hour of the day. A vented lime top provides airflow and visibility, making this a great construction umbrella for those scorching hot jobsites. The polyester shell also has protective coatings (Polyurethane (PU) and UV) which provide the ultimate shelter from sun/UV, rain, and wind. Whether working in a bucket, or on the ground, this heavy-duty umbrella is the ideal solution to help prevent heat-related illnesses on any residential, commercial, agricultural, construction or highway setting.   Features • SIZE – 7ft (2.1m) diameter umbrella top 300D • UV PROTECTION – Polyester shell with PU and UV coatings for extra protection from the elements • ULTIMATE DURABILITY – Powder-coated steel pole & ribs to withstand high winds • 360 SUN PROTECTION – Tilt mechanism for full sun protection at any hour • VENTED CANOPY – Vented top for maximum airflow and to prevent blow aways • MULTIPLE HEIGHTS – Four different height options with peak height of 92in / 2.3m • EASY STORAGE & TRANSPORT – Over-the-shoulder, oversized storage bag with convenient pocket & ground spike included • INCREASED VISIBILITY – Hi-vis option and reflective accents for busy jobsites • TESTED & APPROVED – Meets CPAI-84 flame resistance code
Disposable 3 Ply Face Mask with Ear Loop These Disposable 3 Ply Surgical Face Masks are FDA certified and approved. Great for daily protection from airborne pollutants, helping you breathe safer and easier, while also protecting others from coughs and sneezes. These masks help to protect you from potential hazards and adhere to CDC guidelines.   Features • Comfortable, Breathable, Soft and Skin-friendly, and Easy to Use • 3-Layers • FDA Approved • 50 per Pack • White • One size fits most  
Fiber Optic Stripper CablePrep 3-hole model Hole 1 strips 1.6-3mm fiber jacket to 600-900μm buffer coating. Hole 2 strips 600-900μm buffer coating to 250 micron coating. Hole 3 strips 250μm buffer coating to 125μm glass fiber. • Convenient stripping guide printed on the handle • Safety lock allows the tool to be easily stored when not in use
The Jonard Tools FC-500 precision fiber cleaver is designed to provide a precise cleave and prepare a fiber to be fusion spliced for 250 µm and 900 µm coated optical fiber.    Features • Provides a cleave with a cutting angle of less than 0.5° for optimal fiber preparation for fusion splicing • Long life of 48,000 cuts with 16 position blades • Lightweight and rugged design for long term durability • Holds 250 µm and 900 µm fiber and comes with built in fiber trash can • Scaled holder for accurate cleave lengths from 5 to 20 mm (0.20" to 0.79") • Ideal for fiber technicians, fiber splicers, and anyone that needs to cleave a fiber optic cable prior to performing a fusion splice   Specifications Cleave Length:   5 mm - 20 mm (Single Fiber 0.25 mm Coating),                              12 mm - 20 mm (Single Fiber 0.9 mm Coating) • Cleave Angle:  Less than 0.5° • Blade Life:  48,000 cleaves (3,000 per blade position) • Dimensions:  2.63" x 3.93" x 2.3" (67 mm x 100 mm x 59 mm) • Weight:  0.595 lb (269 g)  
• Test, map and identify up to 8 locations in a single step • Cuts testing and identification time in half • Includes: -7 Test-n-Map™ Remotes (#2 - #8) - 8 threaded male to push-on female coaxial push-on F adapters - 8 RJ45 jumper test cables - Test-n-Map Remote Verification Test Cable (18-Inch) - Zipper bag • Included jumper cables connect the Test-n-Map Remotes to wall outlets • Use the Test-n-Map Remote Verification Test Cable (included) to conduct a validation test or another cable that is at least two feet in length • Requires Klein Commander™, Scout® Pro LT or Scout® Pro 2 Tester -- sold separately • Zipper pouch holds all of the pieces in one place • Cordura is a registered trademark of INVISTA
The Heat Prep CHT makes connector insertion easier than ever. It is the first tool of its kind that tackles the challenge of making reliable, rock-solid connections every time when working with dry, brittle, cold or cracked cable, especially in harsh winter conditions. It is also ideal when working with tough cable jacket types. By applying controlled heat, the CHT makes virtually any cable jacket more pliable and more workable, which saves technicians’ hands. The CHT is designed to ensure precise connections when working with many different cable types, brands and gauges up to an outer dimension of .45", including RG-6 and RG-11, direct-burial, LMR-style, and power cables. • The only hand-held tool that safely makes cable jacket material more pliable, more workable. • Reduces the force needed for connector insertion by more than 300%, which means less wear and tear on technicians’ hands. • Predictable, rock-solid connections ensure quality work, reduced service calls. • Field tested and proven to withstand the harshest conditions and toughest applications.     Safe, Controlled Heat: Professionally engineered to safely deliver just the right amount of heat, the CHT is the smart alternative to the hazardous practice of using lighters or torches to soften cable jacket material. Simple, Efficient Design: The CHT is comfortable to hold, easy to operate, and reliable even in the toughest working conditions. There’s no special technique or guesswork required to get perfect results every time. Long-lasting, Rechargeable Lithium-ion Battery: The battery provides 15 to 45+ heating cycles per charge, depending on conditions, and a total life of 10,000 heat cycles. The indicator light shows charging status. Medical-grade, Waterproof Silicone Casing: Designed to withstand the toughest field conditions, the Heat Prep CHT performs reliably in the harsh winter environments where cable heating is needed most. Easy Operation, Easy-to-read Indicator Lights: With the push of a button, color-coded indicator lights show exactly when the CHT has reached the appropriate temperature and is ready to use. No need to worry about excessive, potentially cable-damaging heat. Wide Range of Cable Applications: The CHT supports many cable types, brands and guages up to an outer dimension of .45", including RG-6 and RG-11, direct-burial, LMR-style, and power cables. Fits into Existing Pouches: Conceived by technicians for technicians, the CHT shuts itself off automatically when a task is completed and is designed to fit conveniently into all standard tool pouches used by technicians.   Weight 1.4 lbs/.62 kg Length 8.5 in/21.59 cm   Click here for a video showing the Heat Prep Cable Heating Tool in use.     
Pole Saw Pruner Kit
Jameson Corporation
PH-11 Pruner Kit includes the pruner, 16" Teflon Coated Saw Blade (SB-1T), adapter (PHA-11), rope (PR-20) and canvas scabbard (SBC-2). Jameson’s steel PH pruners have become the standard in telecommunications and CATV for trimming around aerial lines or drops. Both models, PH-12 and PH-11, feature a chain pulley and center cut blade. PH-11 Pruner has a 1" center cut.
Stripping Coring Tool .750 No Handle Corstrip Tools will provide years of service and can be upgraded with additional components. XL-Series tools are shipped ready for use with a drill and feature our standard adjustable center conductor stop. No Handle. 
Stripping Coring Tool .700 No Handle Corstrip Tools will provide years of service and can be upgraded with additional components. XL-Series tools are shipped ready for use with a drill and feature our standard adjustable center conductor stop. No Handle. 
Strand Brake
The Lemco Strand Brake offers safety and productivity to the strand crew. The three-bolt clamp does not have to be opened or closed for installation or removal. The avoidance of traffic accidents and private property damage in easements is gained productivity. The brake replaces most multiple splices, set-ups, and increases the length of runs.   Features • Works well on 1/4", 5/16" and 3/8" strand. • During pull-out it is 'free-running' as the brake creates no drag and does not scrape the strand's galvanized coating. • Plated steel, stainless steel harness cable. • Wt. 1.1 lbs.
Looking for a pair of versatile pliers that not only crimp but can also cut? These Crimping Pliers are a specialty tool for making crimp connections and cutting in electrical applications. This multi‑functional tool, ideal for those working with non‑insulated terminals from AWG 22‑10, can be used for both cutting and crimping solid or stranded wire. Cuts hard steel 1.6mm diameter. Constructed of hardened steel for long‑lasting durability.   Features •Wire cutter in nose •Plastic–coated handle •Overall length: 9.5"
4-1/2" Small Angle Grinder (7 Amp)
Milwaukee Electric Tool Company
Featuring a compact and lightweight design, the 4-1/2” Small Angle Grinder (6130-33) is the smallest in Milwaukee’s extensive grinder line and is the only tool in its class with a tool free burst resistant guard. The built in advanced airflow system, including Debris Baffles and Multi-Port Exhaust, extends tool life.     Features • Compact, Lightweight Design: At 10.2” long and 3.5 lbs it is the most compact & lightest grinder in the Milwaukee line  • 7.0 Amp, 750 MWO Motor- powerful for daily applications  • Debris Baffles- protect internal components by deflecting damaging debris out of the airflow at the intake vents  • Multi-Port Exhaust-reduces motor burn-up by efficiently venting hot air out of the grinder  • Tool Free, Burst Resistant Guard- the only grinder in its class with a tool free guard  • Compatible with multiple Grinder Guards and Flanges. See cross-reference guide below.  
Quick Sleever
Loading a protection sleeve onto a fiber can be tedious, even for the most experienced technicians. Plus, if they have physical impairments such as poor eyesight then it can become nearly impossible. Designed to make loading protection sleeves onto fiber quick and easy, the PSI-15 Quick Sleever tool is ideal for aligning fiber to the holes of protection sleeves and is a real timesaver.   Features • Conical fiber feed surface guides fiber directly to protection sleeve (patent pending) • Facilitates fiber loading by providing a guide for the fiber to load right into the protection sleeve • Holds up to 15 protection sleeves, each ranging from 1.57" to 2.36" (40 mm to 60 mm) long • When one sleeve is loaded and removed, another automatically falls into place • Compact and lightweight design for easy storage and portability • Remember to sleeve it before you cleave it! • Please see our application note here detailing how to use this tool while you are splicing fiber