Hoist Equipment

Cable Puller (4 Ton)
Pull'R Holdings
4 TON CABLE PULLER Weight: 34.0 lbs Cable Length: 6 ft. Cable Lift: 6 ft. Cable Diameter: 5/16 in. Leverage: 65:1 Features: 1 piece, aluminum alloy ratchet wheel High strength, electro-plated steel parts Galvanized 5/16" Aircraft Cable "Notch-at-a-time" letdown Drop forged steel slip hooks Permanent, non-slip plastic grips Patented compound lever Suggested Applications: Lifting construction metal Erecting buildings and towers Moving, placing and installing heavy equipment Tightening conveyer belts Clearing debris
Cable Puller (3 Ton)
Pull'R Holdings
3 TON CABLE PULLER Weight: 29.0 lbs Cable Length: 12 ft. Cable Lift: 12 ft. Cable Diameter: 5/16 in. Leverage: 35:1 Features: 1 piece, aluminum alloy ratchet wheel High strength, electro-plated steel parts Galvanized 5/16" Aircraft Cable "Notch-at-a-time" letdown Drop forged steel slip hooks Permanent, non-slip plastic grips Suggested Applications: Lifting construction metal Erecting buildings and towers Moving, placing and installing heavy equipment Tightening conveyer belts Clearing debris
Cable Puller (2 Ton)
Pull'R Holdings
2 TON CABLE PULLER Weight: 8.75 lbs Cable Length: 12 ft. Cable Lift: 6 ft. Cable Diameter: 3/16 in. Leverage: 30:1 Features: 1 piece, aluminum alloy ratchet wheel High strength, electro-plated steel parts "Notch-at-a-time" letdown Drop forged steel slip hooks Non-slip plastic grips OSHA recommended safety latches Uses galvanized, aircraft quality cable
Cable Puller (1 Ton)
Pull'R Holdings
1 TON CABLE PULLER Weight: 7.63 lbs Cable Length: 12 ft. Cable Lift: 12 ft. Cable Diameter: 3/16 in. Leverage: 15:1 Features: 1 piece, aluminum alloy ratchet wheel High strength, electro-plated steel parts "Notch-at-a-time" letdown Drop forged steel slip hooks Non-slip plastic grips OSHA recommended safety latches Uses galvanized, aircraft quality cable
C3080890 AB Chance C-Bracket, with Mounting Bolts C3080890 AB Chance C-Bracket, with Mounting Bolts. Must be used in conjunction with the AB Chance Swivel Bracket, part# 3080903. C-Bracket attaches directly to capstan hoist.
AB Chance 1000 lb Capacity Capstan Hoist - C3081170 AB Chance Capstan Cathead Hoists deliver high torque rope pulling muscle with constant control. The C3081170 AB Chance Capstan 120 Volt, AC Powered Cathead Hoist features include improved design and a multiple-planetary drive/backstop-clutch assembled on the center shaft of a steel gear case with full-length internal teeth. This capstan winch design handles more rugged jobs, extends service life and reduces maintenance. Lightweight yet powerful, these portable hoists move many heavyweight tasks and can get into remote or difficult-access sites. Examples: tower erection, raising antennas, hoisting, setting utility poles, pulling wheeled equipment over obstacles, raising transformers, hoisting heavy insulators, stringing and tensioning conductors, pulling cable, and cell tower construction. Capstan operator effort remains low for typical loads simply by adding wraps on the capstan drum. So little effort is required, any crew member can run the cathead hoist. Control is so accurate, rope and loads can be moved fractions of an inch. The unit features a unique rope retaining device which prevents the rope from leaving the drum. Four 3/8" mounting bolts are furnished with each unit. Mounting flange provides eight 3/8" tapped holes on 5-5/8" bolt circle. Specifications: • Catalog No.: C3081170 • Weight: 49 lbs. • Electric Drive: 115-Volt AC • Rope Speed: 40 feet per minute • Source: 14 amperes motor current • Capacity: 1000-lb. load rating  
Turntable design permits proper alignment without repositioning service vehicle. Heavy-gauge steel base bolts direct to truck body wherever convenient. Bracket can be pinned at every 15 degree interval around circular base for stringing, tensioning, sagging conductors; pulling in cable; hoisting equipment; setting poles; pulling vehicles.
C3081370 Powered 115-Volt AB Chance Capstan Cathead Hoist with Foot Control AB Chance Powered Capstan Cathead Hoists features improved design, and a multiple-planetary drive/backstop-clutch assembled on the center shaft of a steel gear case with full-length internal teeth. This design handles more rugged jobs, extends service life and reduces maintenance. Lightweight yet powerful, these portable hoists move many heavyweight tasks and can get into remote or difficult-access sites. Examples: Setting utility poles, pulling wheeled equipment over obstacles, raising transformers (even over fences in back lots), hoisting heavy insulators, stringing and tensioning conductors, pulling cable (indoors and underground), and cell tower construction. Operator effort remains low for typical loads simply by adding wraps on the capstan drum. So little effort is required, any crew member can run the hoist. Control is so accurate, loads can be moved fractions of an inch.   Four 1⁄2" mounting bolts furnished with each unit. Mounting flange provides eight 1⁄2" tapped holes on 5 5⁄8" bolt circle.   Specifications • Product Type: Capstan Hoist • Product: Hoist Only • Style: Standard Drum • Load Rating: 3,000 lbs. (1361 kg) • Power Source: 115 V AC Electric Motor • Rope Speed at Rated Load: 12' (3.7 m) per minute • Source, Minimum: 14 amps • Weight / Ea.: 49 lbs.  
Hubbell 1000 lb AB Chance all purpose capstan bracket. To fit poles to 23” diameter, chain clamps pivot to adjust. All-Purpose Bracket for 1,000-lb. Series 90 hoists - Includes 2 Chain Clamps for poles, angles, beams Recommend Universal Bracket below for Gasoline hoist  
Hubbell 3000 lb AB Chance all purpose capstan bracket. To fit poles to 23” diameter, chain clamps pivot to adjust. All-Purpose Bracket for 3,000-lb. Series 90 hoists - Includes 2 Chain Clamps for poles, angles, beams Recommend Universal Bracket below for Gasoline hoist  
Faster than any other method, this job-ready mount puts a capstan hoist in the right position for pulling, stringing and lifting jobs. With the hoist stored on it, the mount’s square tube simply inserts and pins in any 2"-square receiver of a Class III or IV towing hitch. Now capstan hoists can be as universal as this type trailer hitch is to most service vehicles. The T3080999 Hitch-Receiver Mount features a hole pattern specifically designed to fit Swivel-Base Mount C3080903. The swivel mount’s turntable design permits proper alignment without repositioning service vehicle. The swivel mount permits pinning the bracket at every 15 degree interval around the circular base for stringing, tensioning, sagging conductors; pulling in cable; hoisting equipment; setting poles; pulling vehicles. The Hitch-Receiver Mount is rated at 1,000 lb. to correspond with the ratings of capstan hoists for which it is intended. Only 12V, 115V and Hydraulic 1,000-lb.-rated hoists are recommended for truck mounting. *Requries the use of C3080890 (C-Bracket) and C3080903 (Swivel Base).
Hubbell Power Systems Aluminum Top-Opening Hand line Block Light-weight cast-aluminum housing and sheave, with a hinged, cotter lock yoke and either forged steel or steel meat hook, makes for quick, easy rigging in diversified applications. Hand line and block and tackle efficiency is increased with a forged steel swivel-eye suspension ring and a three-inch sheave operating on bronze oilite bearings. Maximum rope size is 5/8"; maximum load capacity is 1,250 pounds • 3" Aluminum Alloy Snatch Block • Top-Opening with Safety Snap Hook • Rated: 1250 lbs. • Weight: 3 lbs
Hand Line Block
Hubbell
Hand line block with a safety-orange fiberglass-reinforced nylon body and sheave. Rated for a 1,000 lb. (454 kg.) working load, it weighs only 1-1/4 lb. (0.57 kg.) and features a 3"-diameter sheave to accept up to 5/8"-diameter rope. The side-opening design includes a high-strength detent-ball pin with a lanyard retainer, a 360° swivel eye and forged hook with ¾" opening and spring-loaded safety latch.
Screw Type Reel Stand
Current Tool
Screw Type Reel Stands All steel construction Rugged design for job site use Wide base for added stability Adjustment pins wired to stands Roller heads have self-lubricating bearings 670 Medium Screw Type Reel Stand Capacity - 2,500 lb. each, 46"-96" Reel Diameter Height - 21" min. to 54" max. Weight: 46 lbs.
Reel Stand Spindles For use with reel stands Groove on each end keeps spindle in place on reel stands   Stands NOT included.    Catalog Number Diameter Length Capacity lbs use w/ reel stand no. Weight Diameter: 2-3/8" Length:  76" Capacity:  5,000lbs Weight:  47lbs Use with Reel Stand: 660/670  
The AB Chance Capstan Hoist Rope Lock makes for greater control while using your capstan hoist. The rope lock automatically supports the load when the fall line is released until the operator resumes hoisting. The release lanyard permits lowering or lifting loads with precise control over speed and distance. For use with AB chance Series 90 1,000lb  and 3,000 lb capacity capstan hoists. • Ropelock Device for Series 90 AB Chance capstans • Includes two mounting bolts, washers, and release lanyard • Accepts 1/2", 5/8", and 3/4" rope
AB Chance Replacement Rope Hook The AB Chance Replacement Rope Hook prevents the rope or load line from slipping off the end of the capstan drum. This Rope Hook acts as a guide by keeping the rope in the proper position while the capstan is operating.