Grabs, Lanyards & Carabiners

Web Tie-Off Adaptor
DBI / Capital Safety / SALA
Our anchorage connectors are built from top quality materials guaranteeing high strength and durability to stand up to the toughest environments. Anchorage connectors are the unsung heroes of most fall protection systems, often overlooked but critical components because they securely attach your system to the anchorage. Your choice of anchor depends on the type of work being done. Anchorages are sold by what they connect to (general/all purpose, steel, concrete, roof or specialty), whether they are fixed or mobile, and whether they are permanent or portable. They all must provide a secure point of attachment for a complete personal fall arrest system, and must be capable of supporting a load of 5,000 lbs. (22kN) or of meeting OSHA’s criteria of a 2-to-1 safety factor.   • 6 ft. (1.8m) pass-thru type tie-off adaptor • Durable polyester construction • Abrasion resistant polyester wear pad • High strength steel hardware • Compact and lightweight design • 6 ft. (1.8m) web tie-off adaptor, pass-thru type.
Designed for rope ascents, the CROLL ventral rope clamp is simple to use, thanks to its pinch opening system, which is totally integrated in the clamp to avoid any involuntary snagging. The attachment holes ensure efficient positioning during ascents. It is available in two versions to adapt to different rope diameters.   Features: • Used with the ASCENSION handled rope clamp for rope ascents • Simple to use, and effective:      - catch is opened by pinching for simple, quick manipulation The safety catch is totally integrated into the body of the rope clamp to help prevent snagging      - toothed cam with self-cleaning slot optimizes performance under any conditions (frozen or muddy ropes...) The stainless steel cam has better resistance to corrosion      - lower hole is angled to keep the device flat      - upper hole for attaching a SECUR shoulder strap to keep the rope clamp in position      - CROLL L: rope clamp with wide rope channel for excellent fluidity during ascents   Specifications Material(s): aluminum, stainless steel, nylon Certification(s): CE EN 567, CE EN 12841 type B, EAC, NFPA 1983 Technical Use
The Petzl ASAP Lock Mobile Fall Arrester is designed to facilitate manipulations during rope ascents. In normal use, the device moves freely along the rope without any manual intervention and accompanies the user in all of his movements. In case of shock or sudden movement, the fall arrester locks on the rope and stops the user. The ASAP LOCK's integrated locking function allows the user to immobilize the device to reduce the length of a fall. The connection arm makes the system loss-resistant when passing intermediate anchors. The ASAP LOCK is used with an energy absorbing lanyard to work at a distance from the rope. Features: • Constant fall protection:      - arrests any falls, slides, and uncontrolled descents      - works on vertical or angled rope      - locks on the rope even if grabbed during the fall • Integrated locking function allows the user to immobilize the device to reduce the length of a fall. In case of a strong wind, this function also prevents the rope from being blown upward • Simple to use, and effective:      - moves up or down the rope without any manual manipulation of the device      - easy to install and remove at any point on the rope      - connection arm makes the system loss-resistant when passing intermediate anchors      - can be used with an ASAP'SORBER energy absorbing lanyard to work at a distance from the rope     Specifications: • For use on ropes between 10mm and 13mm • Reference(s) B71ALU • Material(s): aluminum, stainless steel, nylon • Certification(s): CE EN 353-2, CE EN 12841 type A, ANSI Z350.15 when used with an ASAP'SORBER, OXAN Triact-Lock, CAPTIV positioning bars, and a RAY 12 mm rope with a sewn termination • Weight: 425g • Made in FR • Guarantee 3 years
The Petzl ASAP’SORBER energy absorber connects to the ASAP or ASAP LOCK mobile fall arrester to allow the user to work at a distance from the rope, in order to protect it during certain work phases. Equipped with tear-webbing inside a pouch that opens on each end, the absorber is protected from abrasion while allowing for regular inspection. It is available in two lengths, to provide the best balance between distance from the rope and reducing fall length. It is certified to U.S. and European standards.     Features: • Connects the ASAP or ASAP LOCK mobile fall arrester to the harness • Allows the user to keep the rope at a distance in order to:       - declutter the work area       - protect the rope from sharp tools and molten metal splash • Absorbs energy in case of a fall:      - tearing of the energy absorber webbing limits the impact force on the user      - designed for users who weigh between 110 and 286 lbs (50 and 130 kg)      - progressive tearing reduces the deceleration on lightweight users      - durable fabric pouch with opening system at each end, protects the energy absorber from abrasion or contaminants while allowing for regular inspection of the absorber • Can be used with OXAN TRIACT-LOCK (international version) carabiners • Comes with two CAPTIV positioning bars that favor loading of carabiners along the major axis and keep them integrated with the lanyard   Specifications: • Material(s): nylon, polyester • Certification(s): ANSI Z359.13 6 feet when used with OXAN TRIACT-LOCK carabiners and CAPTIV positioning bars • Certification(s): CE EN 12841 type A when used with an ASAP or ASAP LOCK mobile fall arrester • Certification(s): CE EN 353-2 when used with an ASAP LOCK mobile fall arrester
The Skylotec Claw Vertical Fall Arrest Sleeve is built to travel smoothly along a vertical system while providing fall arrest when needed. The Skylotec Claw is engineered to fit 3/8 Inch and 5/16 Inch solid core wire rope. This high-quality, lightweight stainless-steel device features redundant safety features to reduce your risk of improper installation. The Skylotec Claw Vertical Fall Arrest Sleeve also has a replaceable shock absorbing pack and an anti-gravity locking system. Two hands are required to operate The Skylotec Claw to prevent the unintentional opening of the sleeve. The shackle and swivel carabiner allows you freedom of movement with maximum ease of use. Features: • Redundant safety features to reduce improper installation • Replaceable shock absorbing pack • Anti-gravity locking system • Two-hand operation to prevent unintentional opening of the sleeve • Shackle and swivel carabiner for maximum ease of use and freedom of movement   Specifications: - Fits 3/8 Inch and 5/16 Inch solid core rope - Material: Stainless Steel - Weight: 2.75 lbs - 102 mm X 40 mm X 260 mm - ANSI A14.3-08 - CSA Z259.2.5-17 - OSHA
EZ-Stop Web Rope Adjuster with Lanyard (3-Foot) Manual rope adjuster with 3 ft. (0.9 m) EZ-Stop shock absorbing lanyard for use on 5/8" (16 mm) rope lifeline. We have you covered with a complete line of mobile and static rope grabs for both synthetic fiber rope and steel wire cable, along with a wide variety of lifelines to meet your work needs. All of our rope grabs are made of high grade corrosion resistant materials. Our most popular LAD-SAF™ rope grabs automatically follow you, giving you maximum freedom and hands-free operation. They can be detached or removed anywhere along the lifeline. The rope grabs utilize a cam /ever as well as a friction sensitive brake to lock the rope grab onto the lifeline in case of a fall, even if the operator holds the device open in a panic situation. They will also reduce the arresting forces on a worker if there is a fall. We also manufacture a complete range of lifelines for use with our rope grabs.   • Manual design allows user to fix in place • Ideal for work positioning or restraint • Cam locking system for safety • Integral 3 ft. (0.9 m) EZ-Stop™ shock absorbing lanyard • Installs at top or bottom of the lifeline • Durable and lightweight corrosion resistant contruction • For use with 5/8" (16 mm) diameter rope lifeline • Equipped with i-Safe™     Specifications: • Install Type: Temporary • iSafe Equipped • Length: 3 Feet • Number of Users: One • Recommended Industry: Construction, General Industrial, Mining, Oil & Gas, Transportation, Utilities, Wind Energy • Standards/Approvals: OSHA 1910.66, OSHA 1926.502 • Weight: 2 lb. • Weight Capacity: 310 lbs. (141 kg)
ShockWave 2 shock absorbing lanyards incorporate a unique stretchable design. It offers complete freedom of movement while reducing trip fall hazards, dragging or snagging by expanding to 6 ft. (1.8m) when taut and automatically contracting to 4-1/2 ft. (1.4m) in reaction to the worker’s movements. The design is lightweight and provides added comfort and safety. The unique inner core begins to extend and absorb energy once subjected to a fall, and limits the fall arrest forces to safe levels. A built-in impact indicator provides easy visual evidence if the shock has been involved in a fall. All DBI/SALA lanyards incorporate our patented self-locking snap hooks which are widely recognized in the industry for their user friendly operation and are preferred by safety professionals and workers alike. Specifically designed to allow you to open and connect the hook without getting your thumb or fingers in the way - even with gloves on. • 6 ft. (1.8m) double-leg 100% tie-off lanyard • Stretches in reaction to your movements • Abrasion resistant polyester tubular webbing • User friendly self locking snap hook at center • Self-locking aluminum rebar hooks at leg ends • Energy absorbing design limits fall arrest forces • Built-in impact indicator • Protected labels, equipped with i-Safe 6 ft. (1.8m) double-leg 100% tie-off with elastic web and snap hook at center, aluminum rebar hooks at leg ends.       Specifications: • Capacity: 130-310 lbs. (59-141kg) • Size: 6 ft. (1.8m) • iSafe Equipped: Yes • Anchor Connector Hook Type: Rebar Hook • Energy Absorber Class: 6 ft (1.8 m) Free Fall/MAAF 900 lbs. (4 kN) • Harness Connector Hook Type: Snap Hook • Lanyard Type: Variable/Elastic • Number Of legs: Double-Leg 100% Tie-Off • Lanyard Length: 6 ft. (1.8m) • Thread/Stitching: Polyester • Label: Vinyl • General Lanyard: Web • Detailed Lanyard: 1-15/16" (4.9cm) Polyester Tubular Web • Energy Absorber: Polyester • Harness Connection Hook: Zinc Plated Steel • Anchor Connection Hook: Aluminum • Physical Weight: 5.20 lbs (2.4kg) • Standards: OSHA 1910.66, OSHA 1926.502, Capital Safety Gen. Mfg. Req., ANSI A10.32, ANSI Z359.13
Web Lanyard (6')
Elkriver
Centurionz Web Lanyard, 6-feet' • 1" x 6' • Nylon Web • Legs: Single • Connectors: Centurion Zsnap hook each end • Positioning
Elk River 35478 Flex-NoPac Lanyard The Elk River Flex Nopac is one of the most popular shock absorbing lanyards. This twin leg lanyard features 6' legs with a 2-1/4" double-locking rebar hook at each end and a 3/4" centurion auto-lock snaphook in the middle. Features: • Flex-NoPac Energy-Absorbing Web Lanyard (3.6M Gate) • 1-1/2" x 6' elasticized twin leg lanyard • 100% tie-off • 3/4" centurion auto-lock snaphook at one end • 2-1/4" double-locking rebar form hook at opposite ends • Lanyard expands to 6' and contracts to 4.5' • Expandable design keeps lanyard legs out of your way • 3600 lbs Gate • Meets ANSI Z359 Standard
Elk River Flex-NoPac Energy-Absorbing 2 Leg Polyester Web Lanyard with Zsnaphook and Carabiner, 3600 lbs Gate, 6' Length x 1-1/2" Width Product Features • Energy-absorbing 2 leg polyester web lanyard •Connector: zsnaphook, 17426 carabiner each leg • Stretches 4-1/2-feet to 6-feet • 3600 lbs gate • Measures 6-feet length by 1-1/2-inches width
Am’D    (Asymmetrical aluminum carabiner) Asymmetrical aluminum carabiner, suitable for attaching devices. The Keylock system helps prevent snagging Available in three different locking systems.   Especially suitable for attaching devices Excellent strength-to-weight ratio TRIACT-LOCK Specifications Material(s): aluminum Certification(s): CE EN 362
Petzl Am'D Twist-Lock Aluminum Carabiner Petzl's Am'D Twist-Lock Carabiner offers a D-shaped design that makes it ideal for attaching a Grillon to a harness. The Twist-Lock system allows for quick opening amd connecting. This asymmetrical carabiner is made from aluminum and can be used for connecting a belay system. Ergonomically designed, the keylock system can easily be manipulated, even when wearing gloves.   Features: • Great functionality, thanks to its capacity and dimensions:     -efficient shape for use on either end of the carabiner (belay systems)     -carabiner can hold a large quantity of equipment • Good handling and ergonomics:     -D shape for good handling     -shape designed for gripping with gloves on     -Keylock system to avoid any involuntary snagging of the carabiner Specifications: Weight : 75 g Major axis strength : 27 kN Minor axis strength : 8 kN Open gate strength : 8 kN Certification : CE EN 12275 Locking system : SCREW-LOCK Gate opening : 25 mm
ASAP LOCK Mobile fall arrester with locking function The ASAP LOCK mobile fall arrester is designed to facilitate manipulations during rope ascents. In normal use, the device moves freely along the rope without any manual intervention and accompanies the user in all his movements. In case of shock or sudden movement, the fall arrester locks on the rope and stops the user. The ASAP LOCK's integrated locking function allows the user to immobilize the device to reduce the length of a fall. The connection arm makes the system loss-resistant when passing intermediate anchors. The ASAP LOCK is used with an energy absorbing lanyard to work at a distance from the rope.   Constant fall protection: - arrests falls, slides, and uncontrolled descents - works on vertical or angled rope - locks on the rope even if grabbed during the fall Integrated locking function allows the user to immobilize the device to reduce the length of a fall. In case of a strong wind, this function also prevents the rope from being blown upward. Simple to use, and effective: - moves up or down the rope without any manual manipulation of the device - easy to install and remove at any point on the rope - connection arm makes the system loss-resistant when passing intermediate anchors - is used with an ASAP’SORBER energy absorbing lanyard to work at a distance from the rope Specifications Material(s): aluminum, stainless steel, nylon Certification(s): CE EN 353-2, CE EN 12841 type A, EAC Weight: 425 g
ASAP’SORBER Lanyard with energy absorber for ASAP or ASAP LOCK   The ASAP’SORBER lanyard connects to the ASAP or ASAP LOCK mobile fall arrester to allow the user to work at a distance from the rope in order to protect it during certain work phases. It is equipped with a tearing energy absorber located in a zippered fabric pouch to protect it from abrasion while allowing for regular inspection. This lanyard is available in two lengths for a choice of the best balance between distance from the rope and reducing the fall length.   • Connects the ASAP or ASAP LOCK mobile fall arrester to the harness • Allows the user to distance himself from the rope in order to:  - declutter the work area  - protect the rope from sharp tools and molten metal splash • Absorb the energy of a fall by the tearing of specific stitching • Zippered fabric pouch protects the energy absorber from abrasion and splashes while allowing for regular inspection of the absorber • Ends equipped with STRING to hold the connector in position and protect the webbing from abrasion   Specifications Material(s): nylon, polyester Certification(s): CE EN 355, EAC
Cable Grab
Tuf-Tug
TUF TUG Wire Cable Grab Vertical Fall Arrestor System For Vertical Fall Arrest Protection. This is a Passive Fall Arrestor Dual Cam Wire Grab that will attach to your Harness and grab the steel strand running length-wise, up and down the Tower that was installed for this purpose. Features Dual Cams for Double System. For Use with the 3/8 Inch Diameter Solid Core Galvanized Wire Cable. Automatically Travels with User. Conforms to OSHA Specifications and ANSI recommendations. Per Rev. G guidelines, any structure greater than 10’ requires a climber safety device
Lad-Saf X2 Detachable Cable Safety Sleeve
DBI / Capital Safety / SALA
DBI Sala Lad-Saf X2 Detachable Cable Safety Sleeve DBI Sala's Lad-Saf X2 Cable Safety Sleeve includes a carabiner, cam, and inertial locking system. This cable grab fits 3/8" (9.5 mm) and 5/16" (8 mm) diameter, 1x7 or 7x19 solid core cable. The X2 features a locking system that stops falls within inches. This cable grab is extremely rugged and corrosion-resistant for durability, while still offering a lightweight design for ease of movement. Important Note: The X2 is rated for ⅜” and 5/16" cable. However, the X2 works better on the smaller 5/16" size, which isn't a common tower safety climb cable size. A more popular item for common ⅜" size, and the one our Gear Experts recommend is the DBI Sala X3. Features: • Sleeve for Lad-Saf™ fixed ladder safety system • For use on 3/8" (9.5 mm) and 5/16" (8 mm) 1x7 or 7x19 solid core cable • Mobile design follows user for convenient climbing protection • Easy to install and detach anywhere along lifeline • Mechanical and inertial locking system stops falls within inches • Built-in energy absorber and fall indicator • Anti-inversion feature prevents incorrect installation • Saflok™ steel carabiner for secure connection to harness • Extremely rugged and corrosion resistant construction • Extremely compact, lightweight design   Specifications: Capacity: 310 lbs. (141 kg) Brand: DBI-SALA® Sub Brand: Lad-Saf™ iSafe Equipped: Yes Label: Polyester, Stamped Model: 6160030 Physical Dimensions: 4.70x1.30x6.00 (in) Physical Weight: 2.10 lbs (1.0kg) Product Styles: Mobile Product Types: Flexible Cable Ladder Safety Standards: ANSI A14.3-1992, Capital Safety Gen. Mfg. Req. Install Type: Temporary Number Of Users: One Structure Type: Straight Ladder
DBI Sala Lad-Saf X3 Detachable Cable Safety Sleeve The DBI Sala Lad-Saf X3 Detachable Cable Safety Sleeve comes with a steel carabiner. This cable sleeve is for use with 3/8" solid core cable. The mobile design allows the device to freely follow the user. The mechanical and inertial locking system of this cable grab stops falls within inches.   Features: • Sleeve for Lad-Saf™ fixed ladder safety system • For use on 3/8 in. (9.5 mm) 1x7 or 7x19 solid core cable • Mobile design follows user for convenient climbing protection • Easy to install and detach anywhere along lifeline • Mechanical and inertial locking system stops falls within inches • Built-in energy absorber and fall indicator with swivel • Anti-inversion feature prevents incorrect installation • Saflok™ steel carabiner for secure connection to harness • Extremely rugged and corrosion resistant construction • Extremely compact, lightweight design • Integrated RFID tag, equipped with i-Safe™ Specifications: Capacity: 310 lbs. (141 kg) Brand: DBI-SALA® Sub Brand: Lad-Saf™ iSafe Equipped: Yes Carabiner/Hook: Zinc Plated Steel Label: Polyester, Stamped Model: 6160054 Physical Dimensions: 4.70x1.30x6.00 (in) Physical Weight: 2.10 lbs (1.0kg) Product Styles: Mobile Product Types: Flexible Cable Ladder Safety Standards: ANSI A14.3-1992, Capital Safety Gen. Mfg. Req. Install Type: Temporary Number Of Users: One Structure Type: Straight Ladder
Elk River Centurion Flex NoPac Lanyard Elk River Centurion Series Lanyard that features large aluminum carabiners on the ends. • Flex-NoPac Energy-Absorbing Web Lanyard (3.6M Gate) • Energy-Absorber maximum arresting force will be 900 lbs. or less when used in a 6 ft or less free fall • 1-1/2" x 6' Twin Leg • Polyester Elasticized Webbing • (1) 3/4" Centurion Zsnaphook • (2) Large Aluminum Carabiner on Legs, 2" Gate Opening • 3.5M Gate, Minimum Tensile Load 5,000 lbs. Meets Standards:   -ANSI Z359.13-2009   -ANSI A 10.32-2004   -CSA Z259-11-05 Weight: 3.9 Lbs  
Carabiner
Tuf-Tug
Tuf Tug TTMHC-1500 Load Rated Carabiner   The Tuf Tug TTMHC-1500 Load Rated Carabiner is easy to use and workload rated for use in lifting and rigging applications. • 4-2/5" length • 2-3/5" width • 3/4" gate opening • 1,500 lb safe working load limit • ASME B30
Carabiner
Tuf-Tug
Tuf Tug TTMHC-1000 Load Rated Carabiner   The Tuf Tug TTMHC-1000 Load Rated Carabiner is easy to use and workload rated for use in lifting and rigging applications. • 4.1" length • 2.2" width • .5" gate opening • 1,000 lb safe working load limit • ASME B30
Carabiner
Elkriver
The Elk River 17435 is a 2" Fall Rated Steel Carabiner with Roll-Pin. • Has Roll Pin • Auto-twist lock. • Fall rated. • 1/2" x 6-5/8" x 3-7/8" • 2" opening • 3600 lb. (16kN) Gate • ANSI Z359.1-2007 compliant
• Z359.1-2007 Compliant • Rugged alloy steel construction • Double lock gate rated to 3,600lbs on face, side & minor axis • 7/8” gate opening (twist lock)  
Large Carabiner
Elkriver
The Elk River 17460 is a 7-1/8"x4-1/2" steel carabiner with a 1-1/8" gate opening and 3600 lb. MBS. • Length: 7-1/8" • Width: 4-1/2" • 1-1/8" throat opening • Auto-twist lock • Fall rated • 3600 lb. (16kN) Gate
Large Carabiner
Tuf-Tug
Tuf Tug TTXLMHC-1500 Load Rated Carabiner   This dual action carabiner is easy to use and workload rated for use in lifting and rigging applications. • 8.75" length • 5.6" width • 2.2" gate opening • 1,500 lb safe working load limit • ASME B30
Large Carabiner
Falltech
• Z359.1-2007 Compliant • Rugged alloy steel construction • Double lock gate rated to 3,600lbs on face, side & minor axis • 2-1/4” gate opening (twist lock)
 Z359.1-2007 Compliant • Double-locking designed for use with harnesses or saddles • 3/4” gate opening • Rated at over 5,000lbs
ClearPack Lanyard 4-1/2’ to 6’ Shock Absorbing lanyard features Y-leg construction for 100% tie-off and utilizes 1-1/4” tubular polyester webbing for resistance to UV light and abrasion. Internal dual-bands of elastic allow the lanyard to expand and contract to avoid tripping hazards. Also features double-locking snap hooks at the attachment and anchorage ends. • ClearPack Shock Absorber limits arresting forces to 900 – 1,000 lbs or less. • Clear PVC cover protects shock absorber and allows for easy inspection. • Elastic legs help to minimize tripping hazards. • 1-1/4” Tubular webbing has a tensile strength of 6,000lbs. • Exceeds the requirements of OSHA 1926. 4-1/2’ to 6’ ClearPack SAL, Y-Leg, 1 Snap Hook at the attachment end and 2 #18 Rebar Hook at the anchorage ends.
Y-leg for 100% Tie-off; with 1 Snap Hook and 2 Rebar Hooks.   Full-length internal energy absorber limits fall forces to 900 lbs or less Durable tubular polyester outer jacket web resists abrasion and UV3,600 lbs gate strength on all steel connectors Contrasting load-indicator stitch displays when a fall event has occurred   Performance Specifications Tensile Strength: Min. 5,000 lbs. Max. Capacity: 310 lbs. Max. Freefall: 6 feet Average Arrest Force: Less than 900 lbs. Max. Elongation: 48 inches   Material Specifications Webbing: Polyester; Min. 6,000 lbs. tensile strength Energy Absorber: Polyester; activation greater than 450 lbs. Connectors: Alloy Steel; Min. 5,000 lbs. tensile strength Connector Gates: Alloy Steel; Min. 3,600 lbs. front load and side load  
GRILLON Lanyard (NO HOOK)  (2 Meter) Adjustable work positioning lanyard The Petzl L052AA Grillon Adjustable Positioning Lanyard is easy to precisely adjust for comfortable positioning at your workstation. Every Petzl L052AA Grillon can be configured for use in single or double mode. The GRILLON features a protective sheath that protects the rope from abrasive contact and enhances rope glide. The protective sheath can be removed to allow you to use The GRILLON in single mode so you can move closer to your anchor. The GRILLON is also certified to North American, European and Russian standards. Features: • An easy to adjust system allows the length to be precisely adjusted for comfortable positioning at your workstation • Can be used in two modes:       -Double mode, on the harness side attachment points, is ideal for when you're working with weight on your feet. This type of attachment ensures better load distribution on your belt. The length of your GRILLON is adjusted by pressing on the pivoting cam        -Single mode, on the harness ventral attachment point, is ideal for when the anchor is located above you, so that the load is comfortably distributed between your belt and leg loops. The length of your GRILLON is adjusted by operating the handle while holding the free end of the lanyard • Sewn terminations on both ends with a plastic sheath to keep the connector in position and protect the rope from abrasion • A protective sheath, removable for single mode, protects the rope from abrasion and enhances rope glide
GRILLON Lanyard (NO HOOK)  (3 Meter) Adjustable work positioning lanyard The Petzl L052AA Grillon Adjustable Positioning Lanyard is easy to precisely adjust for comfortable positioning at your workstation. Every Petzl L052AA Grillon can be configured for use in single or double mode. The GRILLON features a protective sheath that protects the rope from abrasive contact and enhances rope glide. The protective sheath can be removed to allow you to use The GRILLON in single mode so you can move closer to your anchor. The GRILLON is also certified to North American, European and Russian standards. Features: • An easy to adjust system allows the length to be precisely adjusted for comfortable positioning at your workstation • Can be used in two modes:       -Double mode, on the harness side attachment points, is ideal for when you're working with weight on your feet. This type of attachment ensures better load distribution on your belt. The length of your GRILLON is adjusted by pressing on the pivoting cam        -Single mode, on the harness ventral attachment point, is ideal for when the anchor is located above you, so that the load is comfortably distributed between your belt and leg loops. The length of your GRILLON is adjusted by operating the handle while holding the free end of the lanyard • Sewn terminations on both ends with a plastic sheath to keep the connector in position and protect the rope from abrasion • A protective sheath, removable for single mode, protects the rope from abrasion and enhances rope glide
GRILLON Lanyard (NO HOOK)  (5 Meter) Adjustable work positioning lanyard The Petzl L052AA Grillon Adjustable Positioning Lanyard is easy to precisely adjust for comfortable positioning at your workstation. Every Petzl L052AA Grillon can be configured for use in single or double mode. The GRILLON features a protective sheath that protects the rope from abrasive contact and enhances rope glide. The protective sheath can be removed to allow you to use The GRILLON in single mode so you can move closer to your anchor. The GRILLON is also certified to North American, European and Russian standards. Features: • An easy to adjust system allows the length to be precisely adjusted for comfortable positioning at your workstation • Can be used in two modes:       -Double mode, on the harness side attachment points, is ideal for when you're working with weight on your feet. This type of attachment ensures better load distribution on your belt. The length of your GRILLON is adjusted by pressing on the pivoting cam        -Single mode, on the harness ventral attachment point, is ideal for when the anchor is located above you, so that the load is comfortably distributed between your belt and leg loops. The length of your GRILLON is adjusted by operating the handle while holding the free end of the lanyard • Sewn terminations on both ends with a plastic sheath to keep the connector in position and protect the rope from abrasion • A protective sheath, removable for single mode, protects the rope from abrasion and enhances rope glide
GRILLON Lanyard (NO HOOK)  (2 Meter) Adjustable work positioning lanyard Lanyard with fine adjustment system for precise work positioning Used in double mode, on the harness lateral attachment points, to distribute the weight on the belt (user has weight on his feet): length is adjusted by pressing on the pivoting cam) Can be used in single mode, on the harness ventral attachment point, to distribute weight between the waistbelt and the leg loops (user is suspended): length is adjusted by operating the handle while holding the free end of the lanyard (it is necessary to open the device to remove the protective sheath) Removable protective sheath protects the rope from abrasive surfaces and allows smooth rope glide   Specifications Certification : CE EN 358 Reference : L52A 002 - Weight : 625 g - Length: 2 m
GRILLON Lanyard (NO HOOK)  (4 Meter) Adjustable work positioning lanyard Lanyard with fine adjustment system for precise work positioning Used in double mode, on the harness lateral attachment points, to distribute the weight on the belt (user has weight on his feet): length is adjusted by pressing on the pivoting cam) Can be used in single mode, on the harness ventral attachment point, to distribute weight between the waistbelt and the leg loops (user is suspended): length is adjusted by operating the handle while holding the free end of the lanyard (it is necessary to open the device to remove the protective sheath) Removable protective sheath protects the rope from abrasive surfaces and allows smooth rope glide   Specifications Certification : CE EN 358 Reference : L52A 004 - Weight : 625 g - Length: 4 m
GRILLON HOOK (2 Meter) Adjustable work positioning lanyard with HOOK connector The GRILLON HOOK adjustable lanyard is used to make work positioning systems, to complement a fall-arrest system. Its length can be very easily and precisely adjusted as necessary for comfortable positioning at the work station. Its HOOK connector is ideal for using the lanyard in double mode on the harness side attachment points. GRILLON HOOK is available in four lengths (2, 3, 4 and 5 m) and is certified to North American and European standards.   Features: Easy to use:     - fine adjustment system allows length to be precisely adjusted for comfortable positioning at a work station     - used in double mode (on the harness side attachment points) when the user works with weight on his feet. This type of attachment gives better load distribution on the belt. Length is adjusted by pressing on the pivoting cam • Sewn terminations on both ends with plastic sheath to keep the connector in position and protect the rope from abrasion • Removable protective sheath protects the rope from abrasive surfaces and allows smooth rope glide • Comes with HOOK connector, ideal for use in double mode on the harness side attachment points • Lanyard length is immediately identified by a color-coded label at the connector end Specifications Material(s): nylon, polyester, aluminum Certification(s): ANSI Z359.3, CSA Z259.11, CE EN 358, CE EN 12841 type C, EAC
GRILLON HOOK (3 Meter) Adjustable work positioning lanyard with HOOK connector The GRILLON HOOK adjustable lanyard is used to make work positioning systems, to complement a fall-arrest system. Its length can be very easily and precisely adjusted as necessary for comfortable positioning at the work station. Its HOOK connector is ideal for using the lanyard in double mode on the harness side attachment points. GRILLON HOOK is available in four lengths (2, 3, 4 and 5 m) and is certified to North American and European standards.   Features: Easy to use:     - fine adjustment system allows length to be precisely adjusted for comfortable positioning at a work station     - used in double mode (on the harness side attachment points) when the user works with weight on his feet. This type of attachment gives better load distribution on the belt. Length is adjusted by pressing on the pivoting cam • Sewn terminations on both ends with plastic sheath to keep the connector in position and protect the rope from abrasion • Removable protective sheath protects the rope from abrasive surfaces and allows smooth rope glide • Comes with HOOK connector, ideal for use in double mode on the harness side attachment points • Lanyard length is immediately identified by a color-coded label at the connector end Specifications Material(s): nylon, polyester, aluminum Certification(s): ANSI Z359.3, CSA Z259.11, CE EN 358, CE EN 12841 type C, EAC
GRILLON HOOK (2 Meter) Adjustable work positioning lanyard with HOOK connector Lanyard with fine adjustment system for precise work positioning Used in double mode, on the harness lateral attachment points, to distribute the weight on the belt (user has weight on his feet): length is adjusted by pressing on the pivoting cam) Can be used in single mode, on the harness ventral attachment point, to distribute weight between the waistbelt and the leg loops (user is suspended): length is adjusted by operating the handle while holding the free end of the lanyard (it is necessary to open the device to remove the protective sheath) Removable protective sheath protects the rope from abrasive surfaces and allows smooth rope glide   Specifications Certification : CE EN 358 Reference : L52H 002 - Weight : 625 g - Length: 2 m
GRILLON HOOK (3 Meter) Adjustable work positioning lanyard with HOOK connector Lanyard with fine adjustment system for precise work positioning Used in double mode, on the harness lateral attachment points, to distribute the weight on the belt (user has weight on his feet): length is adjusted by pressing on the pivoting cam) Can be used in single mode, on the harness ventral attachment point, to distribute weight between the waistbelt and the leg loops (user is suspended): length is adjusted by operating the handle while holding the free end of the lanyard (it is necessary to open the device to remove the protective sheath) Removable protective sheath protects the rope from abrasive surfaces and allows smooth rope glide     Specifications Certification : CE EN 358 Reference : L52H 003 - Weight : 735 g - Length: 3 m
Professional-duty hinged, self-tracking rope grab features rugged alloy steel construction. Hinged design allows for easy attachment to the lifeline while the triple function lock provides the highest degree of safety and security available. Also features a manual park feature allowing the grab to function in self-tracking or park mode. The 8355 includes a permanently attached 3' Clearpack shock-absorbing lanyard. • Tough alloy steel construction. • Unique triple lock mechanism is extraordinarily secure. • Manual park lever allows the grab to be used for fall arrest or work positioning. • For use with 5/8" rope. • Meets the requirements of OSHA 1926 and ANSI Z359.
Elk River 5/8" Rope Grab w/attached Zorber • Zorber Web Lanyard with Attached Rope Grab • 5/8” x 1” x 3’ • Zorber Web Lanyard • Rope Grab • ZSnaphook 3.6M Gate  
Flex-ZORBER® Energy-Absorbing Web Lanyards (3.6M Gate) Nylon & Polyester Web 1-1/2” X 6’ / Flex-ZORBER® Energy-Absorbing Lanyard, Twin Leg, Zsnaphook / Rebar Hook P/N 36897  
Shock Absorbing Lanyard
DBI / Capital Safety / SALA
EZ Stop & Force2™ Shock Absorbing Lanyard 6 ft. (1.8m) web single-leg Force2™ with snap hooks at each end. PRODUCT HIGHLIGHTS 6 ft. (1.8m) single-leg lanyard Force2™ 12 ft. free fall (3.6m) and dual capacity rated Extremely compact and lightweight Exclusive Hi-10™ Vectran™ energy absorption system Abrasion resistant polyester webbing User friendly self locking snap hooks Built-in reflective materials Impact indicator Protected labels, equipped with i-Safe™  
Wire Rope / Cable Grab
DBI / Capital Safety / SALA
This Item has been discontinued. Here is the replacement/alternative: 6160030
Wire Rope / Cable Grab
DBI / Capital Safety / SALA
This Item has been discontinued. Here is the replacement/alternative: 6160030
Rope Grab with Lanyard
DBI / Capital Safety / SALA
Rope grab with Lanyard.  A compact, lightweight, automatic trailing rope grab. Designed with single cam & roller. For use with 5/8” rope only. 3-foot shock absorbing lanyard included­­­­­­­
Petzl ASAP Mobile fall-arrest device for rope   With its unique locking system, the ASAP is a reference product in fall protection for workers at height. In normal use, the device moves freely along the rope without any manual intervention and accompanies the user in all his movements. In case of shock or sudden acceleration, the ASAP locks on the rope and stops the user. The ASAP may also be combined with an ASAP'SORBER energy absorbing lanyard to work at a distance from the rope. Constant fall protection: •  arrests falls, slides, and uncontrolled descents •  works on vertical or angled rope •  locks on the rope even if grabbed during the fall Simple to use, and effective •  moves up or down the rope without any manual manipulation of the device •  easy to install and remove at any point on the rope •  may be combined with an ASAP'SORBER energy absorbing lanyard to work at a distance from the rope • Comes with a OK TRIACT-LOCK automatic locking carabiner   Specifications • Reference(s) B71AAA • Material(s): aluminum, stainless steel • Certification(s): CE EN 353-2, CE EN 12841 type A • Weight: 370 g (295 g for ASAP and 75 g for OK TRIACT-LOCK) • Made in FR  
Rope Grab with Lanyard (R)
DBI / Capital Safety / SALA
Rope grab with Lanyard (R).  A compact, lightweight, automatic trailing rope grab. Designed with single cam & roller. For use with 5/8” rope only. 3-foot shock absorbing lanyard included­­­­­­­
CROLL Chest ascender The CROLL chest ascender is unmatched for efficiency on fixed lines. Compact and lightweight, it does not interfere with progression. The stainless steel wear plate improves durability by reinforcing the rope friction zone.   Description • Used with a BASIC ascender or with an ASCENSION handled ascender for rope ascents • Toothed cam with self-cleaning slot optimizes performance under any conditions (frozen or muddy ropes...) • Stainless steel cam has better resistance to corrosion • Stainless steel wear plate for improved durability • Catch is opened by pinching for simple, quick manipulation • Lower hole angled to keep the CROLL chest ascender flat • Upper hole for attaching a TORSE shoulder strap to keep the rope clamp in position Specifications Material(s) : aluminum frame, stainless steel cam and wear plate, nylon safety catch Weight : 85 g Rope compatibility : 8 to 11 mm Certification(s) : CE EN 567, UIAA  
Rescucender
Petzl
Cam-loaded Rope Clamp • Removable axle can be used to install or remove the clamp at any point on the rope • Locking pin: reduces the risk of undoing the system accidentally • For single ropes between 9 and 13 mm in diameter • Certification: CE EN 567 • Weight: 250 g