Ripley / Cablematic

"Twister" Flat Drop Cable Slitter
Ripley / Cablematic
Ripley Miller's MB04-7000 has a patent-pending design that slits both sides of flat drop cable jackets on end or mid-span applications, and allows for precise, safe and easy access to fiber buffer tube. Features: • Unique articulating hinge allows accurate end AND mid-span stripping without disassembling the tool — simply close the tool over the cable and pull to slit jacket • Shielded blades promote safe operation and prevent cuts and lacerations • Ergonomic design with convenient opening tabs fits comfortably in hand and requires minimal effort to use • Comes with two installed reversible blades plus two additional replacement blades stowed conveniently in tool • Lightweight and durable polymer construction   Compatibility: • Cable Compatibility: Commscope, Corning, Draka/Comteq, OFS, Prysmian, Superior Essex • Cable Width: 0.305″ - 0.350″ (7.7 mm - 8.9 mm) • Cable Height: 0.155″ - 0.185″ (3.9 mm - 4.7 mm) • Jacket Thickness: 0.03″ - 0.04″ (0.76 mm - 1.0 mm)
Introducing the new MSAT 16, an exciting new solution designed to easily size and access fibers in loose tube cables ranging from 1 to 3 mm diameters in mid-span applications. Features • Safe, compact & ergonomic design fits comfortably in hand for easy operation without risk of injury. • 16 unique diameter settings accommodate loose tubes ranging from 1 mm to 3 mm. • Convenient built-in sizing channels quickly determine proper setting for a wide variety of loose tube cables. • Patent-pending design features a self-aligning, easy-to-load buffer tube channel that supports & guides the tube through precision shaving operation. • Rugged polymer construction is lightweight & durable. • Spring-loaded design eliminates need to lock or clamp tool while in use. •Fixed stainless steel blades require no adjustments and replace easily.   Compatibility • Buffer Tube Diameter 0.039″ - 0.118″ (1.0 - 3.0 mm)  
Compression Tool
Ripley / Cablematic
CT2-AS-EX Compression Assembly Tool Assembles 59,6,7 and 11 "F" compression type connectors  • Designed for the use of lower hand force when the tool is in compression mode • Spring loaded handle with push button handle lock to keep tool compact and pouch friendly • Compact ergonomic design with high strength cast aluminum body • Easy to use around and in wall boxes where space and cable length may be limited • Spring loaded split jaws position cable and connector for easy insertion and removal • Tool requires no special adjustment or adapters and can be kept in calibration with a supplied guage block • Length: 8.19 in (210.00 mm) • Weight: 14.28 ounces (408.0g)    
Compression Tool
Ripley / Cablematic
Unique new CAT-AS (All Series) allows assembly of series 59/6, 7 and 11 drop connectors in one versatile tool. Two sets of jaws, precision designed.
Compression Tool
Ripley / Cablematic
This item has been discontinued. Please click on one of these alternatives:  HPT-6590   Cobra360
Compression Tool
Ripley / Cablematic
Compression Tool Ripley all-series compression tool kit for compression connectors. Kit comes with SDT strip tool.
Compression Tool
Ripley / Cablematic
CT2-AS-EX Compression Assembly Tool Assembles 59,6,7 and 11 "F" compression type connectors (PCT-TRS and PPC-EX compression connectors) • Designed for the use of lower hand force when the tool is in compression mode • Spring loaded handle with push button handle lock to keep tool compact and pouch friendly • Compact ergonomic design with high strength cast aluminum body • Easy to use around and in wall boxes where space and cable length may be limited • Spring loaded split jaws position cable and connector for easy insertion and removal • Tool requires no special adjustment or adapters and can be kept in calibration with a supplied guage block • Length: 8.19 in (210.00 mm) • Weight: 14.28 ounces (408.0g)    
Compression Tool
Ripley / Cablematic
Cablematic offers the All  Series CAT-AS-FX fixed compression assembly tool. Assembly of series RG59/6 & 7/11 drop connectors is done with two sets of jaws, one set for RG59 & 6, and another set for RG7 & 11 connectors. Features a factory set non-adjustable tip, cast aluminum body and spring loaded split jaws which position the cable and connector for easy insertion/removal. Color coded green plunger tip band allows easy connector identification. The 1-lb tool is 7.25" long.
Compression Tool (EX)
Ripley / Cablematic
Compression Tool Ripley EX series RG59/6 compression tool compression connectors.     California Residents See Prop 65 WARNINGS.
Compression Tool (EX)
Ripley / Cablematic
Works on PPC EX Series connectors.  Unique new CAT-AS (All Series) allows assembly of series 59/6, 7 and 11 drop connectors in one versatile tool. Two sets of jaws, precision designed.
CA Series Drop Cable Assist Tool • Handy rubber cable grip designed to hold 59, 6, 7 & 11 series coaxial cable during the pulling operation & connector insertion • Stable base is designed for most data/voice modular jacks when punching down wire • Construction from flexible, rubberized material to ensure maximum cable & wire gripping action   Compatibility Cable Type:     59/6, 7, 11 Cable Access:  Mid-Span   Material:  Rubber Length:     3″ (76 mm) Weight:    1.4 oz (41 g)
Fiber Optic Drop Cable Slitter
Ripley / Cablematic
Mid-Span Access Tool • Allows easy mid-span access to optical fibers in loose buffer tubes • Access tube sizes from 1.9 mm to 3.0 mm • Shaves precise opening to prevent fiber damage • Sizing channels to easily determine tube size • Locking mechanism ensures tool will remain closed through the entire shaving operation Made in the U.S.A. Dimensions: 3.9 x 1.5 x 0.7 in. (99 x 38 x 18 mm)   Replacement Blade: Part No.: 80935 (5 blades – 2 screws)
Fiber Optic Stripper
Ripley / Cablematic
Optic Stripper • CFS-2 for stripping 250 micron buffer coating to expose 125 micron cladded fiber • Second hole for stripping 2-3 mm fiber jackets • Pre-set at the factory—no adjustments needed • Will not scratch or nick glass fiber • All stripping surfaces are manufactured to precise tolerances to assure clean, smooth strips • Comfort-grip, ergonomic handles • Lock to hold tool closed when it is not in use Length: 6.5 in (165 mm) Weight: 4.2 oz (119 g)  
Fiber Optic Stripper
Ripley / Cablematic
• For stripping 250 micron buffer coating from 125 micron optical fiber • Precision diameter hole & V-opening in blade allow for accurate buffer coating removal • Pivot pin, spring and precision handles enhance tool functionality and durability • Factory set, requires no adjustment • Prevents scratching or nicking of optical fiber • All cutting surfaces are precision formed, hardened, tempered and ground assuring precise buffer removal Made in the U.S.A. Length: 5.375 in (136.53 mm) Weight: 2.5 oz (71 g)  
Fiber Optic Stripper
Ripley / Cablematic
CFS-3 Fiber Optic Stripper The CFS-3 Tri-hole Stripper is a 3 hole model of our classic CFS-2 900 but with 3 holes for safe and efficient fiber stripping. • One step cable preparation. • 1st hole strips 1.6 – 3mm Fiber Jacket to the 600-900 buffer coating. • 2nd hole strips the 600-900 micron buffer coating to the 250 micron coating. • 3rd hole strips the 250 micron buffer coating to the 125 micron glass fiber. Length: 6 in (152.4mm) Weight: 3.97 oz (112.69g)  
Flexfeeder Single Drop Trimmer
Ripley / Cablematic
Single Drop Trimmer for Times Fiber Communications (TFC) MegaDrop (formerly named Flexfeeder) TX-10-15 Low Loss Drop Cable and F50 CommScope® cable ONE STEP cable preparation for smooth, precise cuts removing both the jacket and the dielectric • Designed to prepare standard, tri and quad shield cable construction • Prepares cable for all major connector manufacturers to 1/2 in. or 1 in. (12.7 or 25.4 mm) center conductor length and 1/4” (6.35 mm) braid preparation • Ergonomic, lightweight design • Made in the U.S.A. • Non replaceable factory fixed blade cartridge • Length: 4.6 in. (119 mm)  
Jacket Stripping Tool (500)
Ripley / Cablematic
Ripley's Jacket Stripping Tools are sure-shot tools to get fast and efficient removal of jackets from trunk and distribution coaxial cables including over-sized jackets and flooded cables. This particular line is for use on CommScope P3 Cable, Times Fiber T4 Plus, T6, and T10. Features: • Anodized color-coded bodies • Preset JST blade assures there is no scoring or nicking of the aluminum sheath • Knurled body for sure grip Specifications: - Cable Size: 500 - Color: Red - Replacement Blade: CB 6667H - Length: 2.63 in. - Weight: 6.0 oz - Made in the U.S.A
Jacket Stripping Tool (625)
Ripley / Cablematic
Ripley's Jacket Stripping Tools are sure-shot tools to get fast and efficient removal of jackets from trunk and distribution coaxial cables including over-sized jackets and flooded cables. This particular line is for use on CommScope P3 Cable, Times Fiber T4 Plus, T6, and T10 cable. Features: • Anodized color-coded bodies • Preset JST blade assures there is no scoring or nicking of the aluminum sheath • Knurled body for sure grip Specifications: - Cable Size: 625 - Color: Blue - Replacement Blade: CB 6667H - Length: 2.63 in. - Weight: 6.0 oz - Made in the U.S.A
Jacket Stripping Tool (750)
Ripley / Cablematic
Ripley's Jacket Stripping Tools are sure-shot tools to get fast and efficient removal of jackets from trunk and distribution coaxial cables including over-sized jackets and flooded cables. This particular line is for use on CommScope P3 Cable, Times Fiber T4 Plus, T6, and T10 cable.   Features: • Anodized color-coded bodies • Preset JST blade assures there is no scoring or nicking of the aluminum sheath • Knurled body for sure grip Specifications: - Cable Size: 750 - Color: Green - Replacement Blade: CB 6667H - Length: 2.63 in. - Weight: 6.0 oz - Made in the U.S.A  
Jacket Stripping Tool (875)
Ripley / Cablematic
Ripley's Jacket Stripping Tools are sure-shot tools to get fast and efficient removal of jackets from trunk and distribution coaxial cables including over-sized jackets and flooded cables. This particular line is for use on CommScope P3 Cable, Times Fiber T4 Plus, T6, and T10 cable. Features: • Anodized color-coded bodies • Preset JST blade assures there is no scoring or nicking of the aluminum sheath • Knurled body for sure grip Specifications: - Cable Size: 875 - Color: Orange - Replacement Blade: CB 6667H - Length: 2.63 in. - Weight: 6.0 oz - Made in the U.S.A
Messenger Web Slitter/Shaver
Ripley / Cablematic
Ripley MWSS is a dual function tool designed to first remove the cable messenger by slitting the web, then shave the residual web material leaving a smooth surface on the cable jacket. Precise shaving of web material allows for proper cable preparation using a standard jacket stripping or coring tool Alignment slot in cable tray insures precise shaving of the residual web material after the slitting operation Slitting blade is factory set, but shaving blade can be field adjusted as required Spring loaded blade shield secures the cable into the tray Blade shield designed to protect the user from injury and the blade from damage For Cables CommScope® QR 320     CommScope® P3 412 JCAM     Times Fiber T10 412 MS
Mid-Span Access Tool
Ripley / Cablematic
• Quickly and easily access fibers in 2, 2.5 and 3 mm buffer tubes in a mid-span location without fiber damage • All blades precisely factory mounted in tube slitting channels with no adjustment required by the installer • Tool design incorporates buffer tube size gages on the tool body for ease of selecting proper tube slitting channel • Convenient spring loaded lever opens and closes the tool and lever becomes flush with the top of the tool body when closed • For use with the following diameter buffer tubes:    -2.0 mm 1.8-2.2 mm (0.071 in.- 0.086 in.)    -2.5 mm 2.3-2.8 mm (0.090 in.-0.110 in.)    -3.0 mm 2.8-3.2 mm (0.110 in.- 0.126 in.) • Made in the U.S.A • Replacement Blade: Part No: 80794 includes 1 blade set (2 each) and 1/16 in. Allen wrench • Same blade part No. for all three tool channels • Length: 2.5 in. (63.5 mm)  
QRT Tool Kit (QR 1125)
Ripley / Cablematic
Tool Kits for CommScope Quantum Reach (QR) Cable (Cable: 1125) (non-Ratchet) Specifically designed for the following cables:     CommScope® Quantum Reach® (QR)     Times Fiber Communications (TFC) TX10     Alcatel Cable Benelux–ACE/ACW • QRT Kits include a coring and stripping tool and a jacket stripping tool • Manual or drill operation; CST tools have a standard “T” handle with a built-in 3/8 in. (9.5 mm) drill adapter; CST-R tools have a ratchet “T” handle and a separate 3/8 in. (9.5 mm) drill adapter • Heat treated, sheath cutting blade produces a smooth beveled edge and can be replaced without the expense of replacing the entire coring bit • Use of CC-100, CC-200 or CC-200EUR Center Conductor Cleaner/Scraper removes residual dielectric which remains on the conductor after coring and stripping • Made in the U.S.A.   • CST-QR Length: 8.38 in. (213 mm) • Weight: 1 lb (454 g) • JST-QR Length: 2.63 in. (67 mm) • Weight: 6 oz (170 g)
QRT Tool Kit (QR 320)
Ripley / Cablematic
Tool Kits for CommScope Quantum Reach (QR) Cable (Cable: 320) (non-Ratchet) Specifically designed for the following cables:     CommScope® Quantum Reach® (QR)     Times Fiber Communications (TFC) TX10     Alcatel Cable Benelux–ACE/ACW • QRT Kits include a coring and stripping tool and a jacket stripping tool (CST-QR & JST-QR) • JST-QR conveniently snaps onto the CST-QR for ease of storage • JST-QR available separately for replacement • QR Kits now in bronze anodized color for easy QR identification • Manual or drill operation; CST tools have a standard “T” handle with a built-in 3/8 in. (9.5 mm) drill adapter; CST-R tools have a ratchet “T” handle and a separate 3/8 in. (9.5 mm) drill adapter • Heat treated, sheath cutting blade produces a smooth beveled edge and can be replaced without the expense of replacing the entire coring bit • Use of CC-100, CC-200 or CC-200EUR Center Conductor Cleaner/Scraper removes residual dielectric which remains on the conductor after coring and stripping • Made in the U.S.A.   • CST-QR Length: 8.38 in. (213 mm) • Weight: 1 lb (454 g) • JST-QR Length: 2.63 in. (67 mm) • Weight: 6 oz (170 g)
QRT Tool Kit (QR 500)
Ripley / Cablematic
Tool Kits for CommScope Quantum Reach (QR) Cable (Cable: 500) (non-Ratchet) Specifically designed for the following cables:     CommScope® Quantum Reach® (QR)     Times Fiber Communications (TFC) TX10     Alcatel Cable Benelux–ACE/ACW • QRT Kits include a coring and stripping tool and a jacket stripping tool • Manual or drill operation; CST tools have a standard “T” handle with a built-in 3/8 in. (9.5 mm) drill adapter; CST-R tools have a ratchet “T” handle and a separate 3/8 in. (9.5 mm) drill adapter • Heat treated, sheath cutting blade produces a smooth beveled edge and can be replaced without the expense of replacing the entire coring bit • Use of CC-100, CC-200 or CC-200EUR Center Conductor Cleaner/Scraper removes residual dielectric which remains on the conductor after coring and stripping • Made in the U.S.A. • CST-QR Length: 8.38 in. (213 mm) • Weight: 1 lb (454 g) • JST-QR Length: 2.63 in. (67 mm) • Weight: 6 oz (170 g)  
QRT Tool Kit (QR 500) (Ratchet)
Ripley / Cablematic
Tool Kits for CommScope Quantum Reach (QR) Cable (Cable: 500) (Ratchet Model) Specifically designed for the following cables:     CommScope® Quantum Reach® (QR)     Times Fiber Communications (TFC) TX10     Alcatel Cable Benelux–ACE/ACW • QRT Kits include a coring and stripping tool and a jacket stripping tool • Manual or drill operation; CST tools have a standard “T” handle with a built-in 3/8 in. (9.5 mm) drill adapter; CST-R tools have a ratchet “T” handle and a separate 3/8 in. (9.5 mm) drill adapter • Heat treated, sheath cutting blade produces a smooth beveled edge and can be replaced without the expense of replacing the entire coring bit • Use of CC-100, CC-200 or CC-200EUR Center Conductor Cleaner/Scraper removes residual dielectric which remains on the conductor after coring and stripping • Made in the U.S.A. • CST-QR Length: 8.38 in. (213 mm) • Weight: 1 lb (454 g) • JST-QR Length: 2.63 in. (67 mm) • Weight: 6 oz (170 g)  
QRT Tool Kit (QR 540)
Ripley / Cablematic
Tool Kits for CommScope Quantum Reach (QR) Cable (Cable: 540) (non-Ratchet) Specifically designed for the following cables:     CommScope® Quantum Reach® (QR)     Times Fiber Communications (TFC) TX10     Alcatel Cable Benelux–ACE/ACW • QRT Kits include a coring and stripping tool and a jacket stripping tool (CST-QR & JST-QR) • JST-QR conveniently snaps onto the CST-QR for ease of storage • JST-QR available separately for replacement • QR Kits now in bronze anodized color for easy QR identification • Manual or drill operation; CST tools have a standard “T” handle with a built-in 3/8 in. (9.5 mm) drill adapter; CST-R tools have a ratchet “T” handle and a separate 3/8 in. (9.5 mm) drill adapter • Heat treated, sheath cutting blade produces a smooth beveled edge and can be replaced without the expense of replacing the entire coring bit • Use of CC-100, CC-200 or CC-200EUR Center Conductor Cleaner/Scraper removes residual dielectric which remains on the conductor after coring and stripping • Made in the U.S.A. • CST-QR Length: 8.38 in. (213 mm) • Weight: 1 lb (454 g) • JST-QR Length: 2.63 in. (67 mm) • Weight: 6 oz (170 g)
QRT Tool Kit (QR 715)
Ripley / Cablematic
Tool Kits for CommScope Quantum Reach (QR) Cable (Cable: 715) (non-Ratchet) Specifically designed for the following cables:     CommScope® Quantum Reach® (QR)     Times Fiber Communications (TFC) TX10     Alcatel Cable Benelux–ACE/ACW • QRT Kits include a coring and stripping tool and a jacket stripping tool (CST-QR & JST-QR) • JST-QR conveniently snaps onto the CST-QR for ease of storage • JST-QR available separately for replacement • QR Kits now in bronze anodized color for easy QR identification • Manual or drill operation; CST tools have a standard “T” handle with a built-in 3/8 in. (9.5 mm) drill adapter; CST-R tools have a ratchet “T” handle and a separate 3/8 in. (9.5 mm) drill adapter • Heat treated, sheath cutting blade produces a smooth beveled edge and can be replaced without the expense of replacing the entire coring bit • Use of CC-100, CC-200 or CC-200EUR Center Conductor Cleaner/Scraper removes residual dielectric which remains on the conductor after coring and stripping • Made in the U.S.A. • CST-QR Length: 8.38 in. (213 mm) • Weight: 1 lb (454 g) • JST-QR Length: 2.63 in. (67 mm) • Weight: 6 oz (170 g)
QRT Tool Kit (QR 860)
Ripley / Cablematic
Tool Kits for CommScope Quantum Reach (QR) Cable (Cable: 860) (non-Ratchet) Specifically designed for the following cables:     CommScope® Quantum Reach® (QR)     Times Fiber Communications (TFC) TX10     Alcatel Cable Benelux–ACE/ACW • QRT Kits include a coring and stripping tool and a jacket stripping tool (CST-QR & JST-QR) • JST-QR conveniently snaps onto the CST-QR for ease of storage • JST-QR available separately for replacement • QR Kits now in bronze anodized color for easy QR identification • Manual or drill operation; CST tools have a standard “T” handle with a built-in 3/8 in. (9.5 mm) drill adapter; CST-R tools have a ratchet “T” handle and a separate 3/8 in. (9.5 mm) drill adapter • Heat treated, sheath cutting blade produces a smooth beveled edge and can be replaced without the expense of replacing the entire coring bit • Use of CC-100, CC-200 or CC-200EUR Center Conductor Cleaner/Scraper removes residual dielectric which remains on the conductor after coring and stripping • Made in the U.S.A. • CST-QR Length: 8.38 in. (213 mm) • Weight: 1 lb (454 g) • JST-QR Length: 2.63 in. (67 mm) • Weight: 6 oz (170 g)
QRT Tool Kit (QR 860) (Ratchet)
Ripley / Cablematic
Tool Kits for CommScope Quantum Reach (QR) Cable (Cable: 860) (Ratchet Model) Specifically designed for the following cables:     CommScope® Quantum Reach® (QR)     Times Fiber Communications (TFC) TX10     Alcatel Cable Benelux–ACE/ACW • QRT Kits include a coring and stripping tool and a jacket stripping tool (CST-QR & JST-QR) • JST-QR conveniently snaps onto the CST-QR for ease of storage • JST-QR available separately for replacement • QR Kits now in bronze anodized color for easy QR identification • Manual or drill operation; CST tools have a standard “T” handle with a built-in 3/8 in. (9.5 mm) drill adapter; CST-R tools have a ratchet “T” handle and a separate 3/8 in. (9.5 mm) drill adapter • Heat treated, sheath cutting blade produces a smooth beveled edge and can be replaced without the expense of replacing the entire coring bit • Use of CC-100, CC-200 or CC-200EUR Center Conductor Cleaner/Scraper removes residual dielectric which remains on the conductor after coring and stripping • Made in the U.S.A. • CST-QR Length: 8.38 in. (213 mm) • Weight: 1 lb (454 g) • JST-QR Length: 2.63 in. (67 mm) • Weight: 6 oz (170 g)
(Cable: 1160) (ratchet) Times Fiber TX and CommScope P3Cable. Combination tool cores and strips in one fast and precise operation. Manual or drill operation. Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced.
Specifications (Ratcheting) Cable: 1000 Cable Type: CommScope P1, P3 Cable Guard Cable; Times Fiber T4, T6, T10 Cable; Alcatel Cable Benelux - ACE Cable Coring Bit Kit: CB 119K Guide Sleeve: 29113 Sleeve Color: Orange Details Combination tool cores and strips in one fast and precise operation Manual or drill operation; CST tools have a standard "T" handle with a built-in 3/8 inch (9.5mm) drill adapter; CST-R tools have a ratchet "T" handle and a separate 3/8 inch (9.5mm) drill adapter Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced without the expense of replacing the entire coring bit Spiral-fluted, heat-treated steel coring bit Rugged, durable, all-metal construction Strip stops available for exact stripping lengths of 0.50 to 2.00 inch (12.7 to 50.8mm) Color coded cable guide sleeves for easy cable size identification Use of CC-100 or CC-200 Center Conductor Cleaner/Scraper removes residual dielectric which remains on the conductor after coring and stripping
(Cable: 412) (ratchet) Commscope, P1, P3 Cable Guard Cable; time fiber T4, T6, T10 Cable; Alcatel Cable Beneluz- ACE cable. Combination tool cores and strips in one fast and precise operation. Manual or drill operation. Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced.
(Cable: 500) (ratchet) Commscope, P1, P3 Cable Guard Cable; time fiber T4, T6, T10 Cable; Alcatel Cable Beneluz- ACE cable. Combination tool cores and strips in one fast and precise operation. Manual or drill operation. Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced.
(Cable: 565) (ratchet) Times Fiber TX and CommScope P3Cable. Combination tool cores and strips in one fast and precise operation. Manual or drill operation. Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced.
(Cable: 625) (ratchet) Commscope, P1, P3 Cable Guard Cable; time fiber T4, T6, T10 Cable; Alcatel Cable Beneluz- ACE cable. Combination tool cores and strips in one fast and precise operation. Manual or drill operation. Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced.
(Cable: 625PF) (ratchet) CommScope PowerFeeder and Times Fiber T10 Power 20, 22, and 50 Ohm Cable. Combination tool cores and strips in one fast and precise operation. Manual or drill operation. Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced.
(Cable: 700) (ratchet) Times Fiber TX and CommScope P3Cable. Combination tool cores and strips in one fast and precise operation. Manual or drill operation. Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced.
(Cable: 750) (ratchet) Commscope, P1, P3 Cable Guard Cable; time fiber T4, T6, T10 Cable; Alcatel Cable Beneluz- ACE cable. Combination tool cores and strips in one fast and precise operation. Manual or drill operation. Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced.
(Cable: 840) (ratchet) Times Fiber TX and CommScope P3Cable. Combination tool cores and strips in one fast and precise operation. Manual or drill operation. Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced.
(Cable: 875) (ratchet) Commscope, P1, P3 Cable Guard Cable; time fiber T4, T6, T10 Cable; Alcatel Cable Beneluz- ACE cable. Combination tool cores and strips in one fast and precise operation. Manual or drill operation. Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced.
Security Shield Tool
Ripley / Cablematic
Used with 7/16" hex shielded F Connectors. Design includes extended 7/16" shank for ease of use with Torque Wrenches in security shield applications. Machined and heat-treated steel for maximum durability with black oxide finish. Knurled handle for secure gripping and includes a steel loop for turning leverage and carrying.  
Security Shield Tool (WS)
Ripley / Cablematic
Security Shield Tool • Especially designed to be used with PPC AquaTight® EX® Series connectors • For use with 7/16 inch hex shielded "F" connectors • New design with extended 7/16 inch shank allows the tools to be used with the TW Torque Wrenches in security shield applications • Machined and heat treated steel for maximum durability • Knurled handle allows for easy and secure gripping • Steel loop permits additional tool turning leverage and serves as a convenient carrying loop for attachment to belt or pouch • Length: 2.75 in (70 mm)
Strip Tool
Ripley / Cablematic
Ripley strip tool for 59/6 domestic cable. Red cartridge with built in stop. Lightweight and Compact Body Design that allows cable preparation of 59 & 6 without any adjustment or blade cassette change out. One step cable preparation precisely exposes the center conductor by 5/16" (7.93mm) and removes the proper length of jacket at 1/4" (6.35mm). Built in strip stop for precise preparation every time. Lightweight, impact resistant "High Visibility" yellow polymer construction. Superior quality tool steel blade cassettes will perform 1500+ preparations under normal usage.   Replacement Blade: RC596-250
Strip Tool
Ripley / Cablematic
Prepares ALL 59, 6, 7, 11 drop cable constructions as per SCTE and Bellcore specifications. ONE STEP cable preparation exposes the center conductor and removes the jacket. ONE TOOL, with inter-changeable blade cassettes, will perform all the following cable industry standard preparations: -- 1/4 inch (6.35mm) Braid preparation for Series 59, 6 7, 11 cable -- 1/8 inch (3.18mm) Braid preparation for Series 59, 6 ,7 11 cable (NOTE: Tool is not intended for Plenum Series Cable Construction) Cassettes available for ¼ inch (6.35mm) or 1/8 inch (3.18mm) cable preparation: -- Series 59/6 Standard, Tri and Quad Shield cables -- Series 7 Standard, Tri and Quad Shield cables -- Series 11 Standard, Tri and Trilogy Quad Shield cables -- Series 11Q Belden, CommScope® and Times Fiber Quad Shield cables Blade cassettes color-coded and marked with cable series type and braid preparation dimensions for easy identification Unique cassette storage compartment holds two extra cassettes High impact, ‘Hi-Visibility Red’, polymer construction Compact size fits in one hand Series 59, 6 and 7 cassettes are to be used in tool cavity Side (A) only, Series 11 and 11Q in the opposite cavity only No adjustments or extra tools required Made in the U.S.A
Strip Tool
Ripley / Cablematic
ONE STEP cable preparation precisely exposes the center conductor and removes the proper length of jacket to SCTE and Bellcore specifications SMALL ERGONOMIC BODY DESIGN fits into your hand for ease of use and comfort, as well as your tool pouch. Tool body constructed of LIGHTWEIGHT, impact resistant ‘Hi-Visibility Red’ polymer. No adjustments or extra tools required. SDT596-250 is for 59 and 6 series cable only. Made in the U.S.A.   Replacement Blade: RC596-250
Strip Tool
Ripley / Cablematic
ONE STEP cable preparation precisely exposes the center conductor and removes the proper length of jacket to SCTE and Bellcore specifications SMALL ERGONOMIC BODY DESIGN fits into your hand for ease of use and comfort, as well as your tool pouch. Tool body constructed of LIGHTWEIGHT, impact resistant ‘Hi-Visibility Red’ polymer. No adjustments or extra tools required. SDT596-250 is for 11 series cable only. Made in the U.S.A. Replacement Blade: RC11-250
Strip Tool
Ripley / Cablematic
Dual Drop Trimmer Small Body Design that allows cable preparation of 59, 6, 7 and 11 coax cable. One Step cable preparation precisely exposes the center conductor by 5/16" & removes the proper length of jacket at 1/4" • Built-in strip stop for precise preparation every time. • Lightweight, impact resistant "High-Visibility" yellow polymer construction. • Can be supplied with a Mini Coax Cable cassette in place of 7 & 11 cassette. • Blade cassettes color-coded and marked with cable series type and braid preparation dimensions for easy identification. • Length: 3.59 in (92.08 mm) • Weight: 2 ounces (57.0g) • Note: Tool is not intended for Plenum Series Cable Construction.   Replacement blades: RC596-250    (59/6) RC711-250    (7/11)    
Strip Tool (EUR)
Ripley / Cablematic
Ripley strip tool for 59/6 import cable. Orange cartridge with built in stop. Lightweight and Compact Body Design that allows cable preparation of 59 & 6 without any adjustment or blade cassette change out. One step cable preparation precisely exposes the center conductor by 5/16" (7.93mm) and removes the proper length of jacket at 1/4" (6.35mm). Built in strip stop for precise preparation every time. Lightweight, impact resistant "High Visibility" yellow polymer construction. Superior quality tool steel blade cassettes will perform 1500+ preparations under normal usage.   Replacement Blade: RC-EUR-250
Strip Tool (Mini)
Ripley / Cablematic
Ripley - Cablematic | Lightweight Drop Trimmer Mini - (MINI 22-24 AWG & N35)   • Lightweight, impact-resistant "High-Visibility Yellow" polymer construction. • Built-in Strip Stop for precise preparation every time. • Color-coded interchangeable blade cassettes marked with cable series type for easy identification. • Polymer braid brush attachment for folding back the braid after cable prep. • Superior quality tool steel blade cassettes perform 3500+ preparations under normal use.
Strip Tool (Mini-125)
Ripley / Cablematic
Get the perfect trim on all of your mini cables with Ripley's LDT-MINI-125. This stripper is a lightweight cable prep tool, with a compact body design that allows cable preparation of Mini Cable without any adjustment or blade cassette change out. The difference with the LDT-MINI-125 is that it leaves 1/8" braid but still works with 22-24 AWG Mini Coax Cable. Features: Built in strip stop for precise preparation every time Lightweight, impact resistant "High Visibility" yellow polymer construction Superior quality tool steel blade cassettes Blade cassettes color-coded and marked with cable series type for easy identification Note: Tool is not intended for Plenum Series Cable Construction   Specifications: One step cable preparation precisely exposes the center conductor by 5/16" (7.93mm) and removes the proper length of jacket at 1/4" (6.35mm) leaving 1/8" of braid. Will perform 3500+ preparations under normal usage Length: 4 in. Weight: .8 oz. Made in the U.S.A The LDT-MINI-125 Prepares the following Cables: Belden - YR 46940, 1283, 1283S, 1855, 1855A, 7534 Beta Cavi - N35 CommScope: 7534, #23AWG, 7538, 7538B, 7539/7539H, 7301S Honeywell - 5019, 50 29, 5099 Times Fiber - T59M67T-VBV, 759MQ65/40-VBV
Stripping & Coring Tool (1160TX)
Ripley / Cablematic
(Cable: 1160) Times Fiber TX and CommScope P3Cable. Combination tool cores and strips in one fast and precise operation. Manual or drill operation. Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced.
Stripping & Coring Tool (2100)
Ripley / Cablematic
Specifications Cable: 1000 Cable Type: CommScope P1, P3 Cable Guard Cable; Times Fiber T4, T6, T10 Cable; Alcatel Cable Benelux - ACE Cable Coring Bit Kit: CB 119K Guide Sleeve: 29113 Sleeve Color: Orange Details Combination tool cores and strips in one fast and precise operation Manual or drill operation; CST tools have a standard "T" handle with a built-in 3/8 inch (9.5mm) drill adapter; CST-R tools have a ratchet "T" handle and a separate 3/8 inch (9.5mm) drill adapter Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced without the expense of replacing the entire coring bit Spiral-fluted, heat-treated steel coring bit Rugged, durable, all-metal construction Strip stops available for exact stripping lengths of 0.50 to 2.00 inch (12.7 to 50.8mm) Color coded cable guide sleeves for easy cable size identification Use of CC-100 or CC-200 Center Conductor Cleaner/Scraper removes residual dielectric which remains on the conductor after coring and stripping
Stripping & Coring Tool (320QRF)
Ripley / Cablematic
Tools factory set to core and strip required preparation dimensions for the Gilbert ULTRASEAL™ 320 QR and GAF-360-320, PCT-DRS 320QR, PPC EX320QR, and Thomas & Betts Snap-N-Seal® 320 QR “F” connectors. Connector Assembly tools use: - CR41Q for Corning Gilbert GAF-360-320 - CAT-AS for PPC EX320QR or Snap-N-Seal® 320QRF Specifically designed for coring and stripping MDU CommScope Quantum Reach (QR) cables Simple, three step operation: 1. Core and strip the cable end; 2. Remove center conductor residual dielelectric with built-in center conductor cleaner; 3. Remove proper length of outer jacket while chamfering the center conductor Heat treated coring bit and cutting blades for long lasting life Manual operation only Made in USA
Stripping & Coring Tool (412)
Ripley / Cablematic
(Cable: 412) (non-ratchet) Commscope, P1, P3 Cable Guard Cable; time fiber T4, T6, T10 Cable; Alcatel Cable Beneluz- ACE cable. Combination tool cores and strips in one fast and precise operation. Manual or drill operation. Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced.
Stripping & Coring Tool (500)
Ripley / Cablematic
(Cable: 500) (non-ratchet) Commscope, P1, P3 Cable Guard Cable; time fiber T4, T6, T10 Cable; Alcatel Cable Beneluz- ACE cable. Combination tool cores and strips in one fast and precise operation. Manual or drill operation. Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced.
Stripping & Coring Tool (565TX)
Ripley / Cablematic
(Cable: 565) (Non-ratchet) Times Fiber TX and CommScope P3Cable. Combination tool cores and strips in one fast and precise operation. Manual or drill operation. Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced.
Stripping & Coring Tool (625)
Ripley / Cablematic
(Cable: 625) (non-ratchet) Commscope, P1, P3 Cable Guard Cable; time fiber T4, T6, T10 Cable; Alcatel Cable Beneluz- ACE cable. Combination tool cores and strips in one fast and precise operation. Manual or drill operation. Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced.
Stripping & Coring Tool (625PF)
Ripley / Cablematic
(Cable: 625PF) (non-ratchet) CommScope PowerFeeder and Times Fiber T10 Power 20, 22, and 50 Ohm Cable. Combination tool cores and strips in one fast and precise operation. Manual or drill operation. Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced.
Stripping & Coring Tool (650MC)
Ripley / Cablematic
(Cable: 650) Specifically designed for Trilogy MC2 cables. Combination tool cores and strips in one fast and precise operation.
Stripping & Coring Tool (700TX)
Ripley / Cablematic
(Cable: 700) (Non-ratchet) Times Fiber TX and CommScope P3Cable. Combination tool cores and strips in one fast and precise operation. Manual or drill operation. Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced.
Stripping & Coring Tool (750)
Ripley / Cablematic
(Cable: 750) (non-ratchet) Commscope, P1, P3 Cable Guard Cable; time fiber T4, T6, T10 Cable; Alcatel Cable Beneluz- ACE cable. Combination tool cores and strips in one fast and precise operation. Manual or drill operation. Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced.
Stripping & Coring Tool (840TX)
Ripley / Cablematic
(Cable: 840) (Non-ratchet) Times Fiber TX and CommScope P3Cable. Combination tool cores and strips in one fast and precise operation. Manual or drill operation. Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced.
Stripping & Coring Tool (875)
Ripley / Cablematic
(Cable: 875) (non-ratchet) Commscope, P1, P3 Cable Guard Cable; time fiber T4, T6, T10 Cable; Alcatel Cable Beneluz- ACE cable. Combination tool cores and strips in one fast and precise operation. Manual or drill operation. Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced.
Stripping & Coring Tools (565)
Ripley / Cablematic
The QCST-565 conveniently attaches the jacket stripper body (QJST) to the main body of the coring and stripping tool by means of a "quick-change" rotating body ring. Ripley's Quick Change Coring and Stripping tool, you can accurately strip the jacket, core out the dielectric, strip and bevel the aluminum sheath, all in one! Use this trunk tool on Times Fiber TX and CommScope P3 cables. The QJST color coded jacket stripping body is removed and used in a 2 step operation when using flooded cables. Features: • All-In-One Jacket stripping body (QJST), when used separately to remove the jacket on flooded cable, is uniquely designed to automatically provide 3.50 inch (88.9mm) of jacket removal when rotated to the end of the body • Jacket stripper body and coring / stripping tool guide sleeve are all color coded for easy cable identification Pre-set jacket blade assures no scoring or nicking of aluminum sheath Chamfered strip stop is factory installed  • Rugged, durable, all-metal construction • Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced without the expense of replacing the entire coring bit • Spiral-fluted, heat treated steel bit Use of CC-100 or CC-200 Center Conductor Cleaner/Scraper removes residual dielectric which remains on the conductor after coring and stripping  • Weight: 1 lb 4 oz. Made in the U.S.A Feature Sheet & Sizing Info
Stripping & Coring Tools (625T)
Ripley / Cablematic
The QCST625T conveniently attaches the jacket stripper body (QJST) to the main body of the coring and stripping tool by means of a "quick-change" rotating body ring. Ripley's Quick Change Coring and Stripping tool, you can accurately strip the jacket, core out the dielectric, strip and bevel the aluminum sheath, all in one! Use this trunk tool on Times Fiber TX and CommScope P3 cables. The QJST color coded jacket stripping body is removed and used in a 2 step operation when using flooded cables. Features: • All-In-One Jacket stripping body (QJST), when used separately to remove the jacket on flooded cable, is uniquely designed to automatically provide 3.50 inch (88.9mm) of jacket removal when rotated to the end of the body • Jacket stripper body and coring / stripping tool guide sleeve are all color coded for easy cable identification Pre-set jacket blade assures no scoring or nicking of aluminum sheath Chamfered strip stop is factory installed  • Rugged, durable, all-metal construction • Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced without the expense of replacing the entire coring bit • Spiral-fluted, heat treated steel bit Use of CC-100 or CC-200 Center Conductor Cleaner/Scraper removes residual dielectric which remains on the conductor after coring and stripping  • Weight: 1 lb 4 oz. Made in the U.S.A Feature Sheet & Sizing Info
Stripping & Coring Tools (750T)
Ripley / Cablematic
The QCST750T conveniently attaches the jacket stripper body (QJST) to the main body of the coring and stripping tool by means of a "quick-change" rotating body ring. Ripley's Quick Change Coring and Stripping tool, you can accurately strip the jacket, core out the dielectric, strip and bevel the aluminum sheath, all in one! Use this trunk tool on Times Fiber TX and CommScope P3 cables. The QJST color coded jacket stripping body is removed and used in a 2 step operation when using flooded cables. Features: • All-In-One Jacket stripping body (QJST), when used separately to remove the jacket on flooded cable, is uniquely designed to automatically provide 3.50 inch (88.9mm) of jacket removal when rotated to the end of the body • Jacket stripper body and coring / stripping tool guide sleeve are all color coded for easy cable identification Pre-set jacket blade assures no scoring or nicking of aluminum sheath Chamfered strip stop is factory installed  • Rugged, durable, all-metal construction • Heat treated sheath cutting blade produces a smooth beveled edge and can be replaced without the expense of replacing the entire coring bit • Spiral-fluted, heat treated steel bit Use of CC-100 or CC-200 Center Conductor Cleaner/Scraper removes residual dielectric which remains on the conductor after coring and stripping  • Weight: 1 lb 4 oz. Made in the U.S.A Feature Sheet & Sizing Info
Tap Tool
Ripley / Cablematic
Has both 7/16 inch (11.1 mm) and 9/16 inch (14.3 mm) hex sizes. Handy tool for tightening F connectors on tap ports where security shields are not used. Works with most 59 and 6 hex connectors. Works with most 59 & 6 compression ‘F’ fittings (Telewire-Digicon-S™, Gilbert-ULTRASEAL™, PCT-DRS, PPC-EX & EX-XL, Thomas & Betts-SNAP-N-SEAL®, Raychem-EZF®, Stirling-SPL) Works with some 7 & 11 compression ‘F’ fittings (Gilbert-ULTRASEAL ™-T, PPC-EX, Thomas & Betts—SNAP-N-SEAL®, Stirling-SPL, and Raychem (size 7 only). Rugged, aluminum design
Termination Tool
Ripley / Cablematic
LTT-4 locking terminator tool expands Ripley's extensive line of cable preparation tools. It was developed for use in CATV distribution networks to install and remove locking terminators from tap ports. This new tool design also prevents outsiders from tapping into an unused cable port and stealing the CATV signal. The 1.9-ounce LTT-4 has a small handle for easier access between trap shields and measures 4.5" long with a 1" diameter. Includes a solid filled shaft designed to helps keep out foreign debris that could interfere with proper tool operation. Model LTT-4 is used with the industry's most popular taps: Gilbert Engineering GTP and Production Products Company (PPC) LFT locking terminators.
Termination Tool
Ripley / Cablematic
Termination Tool Ripley Gilbert plunger type with Corning Gilbert NS6270 series termination tool on opposite end.
Termination Tool
Ripley / Cablematic
Two terminating tools integrated into one versatile tool. One tool that can now handle a majority of the popular terminators found in the field. Combo tool takes up less space in the installers tool pouch. Model LTT-7/V23 has Gilbert plunger style terminator on one end and the Viewsonics (2-prong& 3 prong) terminating tool on the opposite end of the tool to work both the Viewsonics 2&3 prong terminator.
Termination Tool
Ripley / Cablematic
Two terminating tools integrated into one versatile tool. One tool that can now handle a majority of the popular terminators found in the field. Combo tool takes up less space in the installers tool pouch. Model LTT-7/T-P has the PPC-502 and the T&B-CLF/TRLF terminating tool on the opposite end of the LTT tool.
Torque Speed Wrench 7/16" (20lbs)
Ripley / Cablematic
Proper connectorization at ‘F’ connector interface with factory preset torque setting. Audible ‘clicking’ sound to indicate proper calibrated torque. Speed head allows fast tightening without removing wrench from connector. Note: Wrench works in tightening mode only. Torque in inch pounds: 20
Torque Speed Wrench 7/16" (30lbs)
Ripley / Cablematic
Proper connectorization at F connector interface with factory preset torque setting. Audible clicking sound to indicate proper calibrated torque. Speed head allows fast tightening without removing wrench from connector. Note: Wrench works in tightening mode only. Torque in inch pounds: 30
Torque Wrench 7/16" (20lbs)
Ripley / Cablematic
Proper connectorization at F connector interface with factory preset torque setting. Audible clicking sound to indicate proper calibrated torque. Basic Angled head model.  Torque in inch pounds: 20
Torque Wrench 7/16" (30lbs)
Ripley / Cablematic
Proper connectorization at F connector interface with factory preset torque setting. Audible clicking sound to indicate proper calibrated torque. Basic Angled head model. Torque in Newton Meters: 3.39 Torque in inch pounds: 30
Torque Wrench 7/16" (40lbs)
Ripley / Cablematic
Proper connectorization at ‘F’ connector interface with factory preset torque setting. Audible ‘clicking’ sound to indicate proper calibrated torque. Basic Angled head model. Torque in Newton Meters: 4.51 Torque in inch pounds: 40
Trap Wrench
Ripley / Cablematic
Combines a trap wrench with a security wrench. Fits all standard traps. Lightweight steel and blue polymer construction. Security wrench made of heat treated steel – fits 7/16 inch hex F-fittings. Fits all sizes and types of metal security sleeves. Length: 7.41 in (190.00 mm)