Mounts

J-Mount Pipe Mast (22")
Custom Tool Supply
J-Mount Pipe Mast. 22-inches Long with an Outside diameter of 1.66" An easy way to mount an outdoor antenna on the roof or the side of your house. Designed for mounting satellite dishes and outdoor off-air antennas, this pipe mast is complete with a solid mount foot to offer the best mount possible.  
J-Mount Pipe Mast (28")
Custom Tool Supply
J-Mount Pipe Mast with Struts 28-inches Long with an Outside diameter of 1.66" An easy way to mount an outdoor antenna on the roof or the side of your house. Designed for mounting satellite dishes and outdoor off-air antennas, this pipe mast is complete with a solid mount foot and two support struts to offer the best mount possible.
Tripod (Universal)
Eagle Point Product
Now with Universal mast that fits both Dish Network (1-5/8) and DirecTV (2-inch) OD Mast.    Includes three steel foot spikes to secure your satellite dish to the ground.  This Tripod was designed for the larger HD satellite dishes like the DirecTV Slimline and Free to air. The tripods can be permanently bolted to building surfaces or even concrete with the proper anchor bolts (bolts not included). This is one of the best tripod for your satellite system. Use this portable tripod for your RV, Camper, Appartment or Tailgating. Works almost on all your satellite dishes.  The tripod legs retract and can be stowed in RVs or even carried in passenger vehicles if a portable antenna stand is needed ina mobile application.  • Sturdy steel construction • Zinc / galvanized surfaces resist rust • Mount on roofs, decks or any sturday surface • Swivel feet rotate to accommodate pitched surfaces • Can be used as a portable trpod for RV use • Comes with universal Mast Pole for Dish & DirecTV      
Mounting Bracket
Arlington Industries
1-Gang Mounting Bracket for Class 2 Low Voltage Wiring Fast, Easy installation in existing walls!   Arlington's non-metallic, Low Voltage Mounting Brackets are the time and money-saving solution for faster and easier mounting of Class 2 communications, computer, and cable TV wiring. The bracket is its own template. Level the bracket on the wall, then use the bracket as a guide for the cutout by tracing a line around the inside of the bracket. Designed to mount wall plates flush, our mounting brackets offer features - specially designed screw holes and more - that deliver a better-looking, easy-to-install job. • LV1 through LV4 adjusts to fit 1/4" to 1" wall thicknesses • UL/CSA Listed
Mounting Bracket (double)
Arlington Industries
2-Gang Mounting Bracket for Class 2 Low Voltage Wiring Fast, Easy installation in existing walls!   Arlington's non-metallic, Low Voltage Mounting Brackets are the time and money-saving solution for faster and easier mounting of Class 2 communications, computer, and cable TV wiring. The bracket is its own template. Level the bracket on the wall, then use the bracket as a guide for the cutout by tracing a line around the inside of the bracket. Designed to mount wall plates flush, our mounting brackets offer features - specially designed screw holes and more - that deliver a better-looking, easy-to-install job. Adjusts to fit 1/4" to 1" wall thicknesses UL/CSA Listed
Mounting Bracket (Triple)
Arlington Industries
3-Gang Mounting Bracket for Class 2 Low Voltage Wiring Fast, Easy installation in existing walls!   Arlington's non-metallic, Low Voltage Mounting Brackets are the time and money-saving solution for faster and easier mounting of Class 2 communications, computer, and cable TV wiring. The bracket is its own template. Level the bracket on the wall, then use the bracket as a guide for the cutout by tracing a line around the inside of the bracket. Designed to mount wall plates flush, our mounting brackets offer features - specially designed screw holes and more - that deliver a better-looking, easy-to-install job. Adjusts to fit 1/4" to 1" wall thicknesses UL/CSA Listed
Mounting Bracket (Quad)
Arlington Industries
4-Gang Mounting Bracket for Class 2 Low Voltage Wiring Fast, Easy installation in existing walls!   Arlington's non-metallic, Low Voltage Mounting Brackets are the time and money-saving solution for faster and easier mounting of Class 2 communications, computer, and cable TV wiring. The bracket is its own template. Level the bracket on the wall, then use the bracket as a guide for the cutout by tracing a line around the inside of the bracket. Designed to mount wall plates flush, our mounting brackets offer features - specially designed screw holes and more - that deliver a better-looking, easy-to-install job. Adjusts to fit 1/4" to 1" wall thicknesses UL/CSA Listed
Fascia Mount Kit
Eagle Point Product
Dish approved Fascia Mounting kit. Plate and all mounting hardware included. Includes: • Fascia Mount Plate • 11 Grade 5 Washers • 3  Grade 5 Nuts • 3 Grade 5 Lock Washers • 3 Grade 5 Bolts
Pack of 4 Patio Mounts. • Base 18" x 36" • Mast Outside Diameter 1.66" • Material - 500 hour salt spray steel, Powder coated • Mounting - Non penetrating requiring balast (Concrete Cinder blocks) (NOT INCLUDED)
Pipe Adapter (1-5/8") for Satellite Dishes. Adapts C-Band and PrimeStar pipes for 18˝ dishes. Powder-Coated Durable Finish.
U-Clamp
Various
U-Clamp For DBS mounts on outdoor antennas. Accepts up to 1 3/4” mast.
Rubber Mat Rubber mat for use with Non-Penetrating roof mount. Large enough for use with KAKU Dish. 36" x 36"