2" Fittings

CableReady fitting for use when you're joining two pieces of molding. This Fitting covers the seam. The new improved CO200 comes with a metal insert for added security.  

CableReady fitting for use when you're joining two pieces of molding. This Fitting covers the seam. The new improved CO200 comes with a metal insert for added security.  

CableReady fitting for use when you're joining two pieces of molding. This Fitting covers the seam. The new improved CO200 comes with a metal insert for added security.  

CableReady fitting for use when you're joining two pieces of molding. This Fitting covers the seam. The new improved CO200 comes with a metal insert for added security.  

CableReady fitting for use when you want to make a 90° outside turn around a corner (such as two outside walls).  

CableReady fitting for use when you want to make a 90° outside turn around a corner (such as two outside walls).  

CableReady fitting for use when you want to make a 90° outside turn around a corner (such as two outside walls).  

CableReady fitting for use when you want to make a 90° outside turn around a corner (such as two outside walls).  

CableReady fitting for use when you want to make a left or right turn at a 90° angle on a flat surface. This is a 2-piece fitting. The RA200 snaps onto a right angle clip.  

CableReady fitting for use when you want to make a left or right turn at a 90° angle on a flat surface. This is a 2-piece fitting. The RA200 snaps onto a right angle clip.  

CableReady fitting for use when you want to make a left or right turn at a 90° angle on a flat surface. This is a 2-piece fitting. The RA200 snaps onto a right angle clip.  

CableReady fitting for use when you want to make a left or right turn at a 90° angle on a flat surface. This is a 2-piece fitting. The RA200 snaps onto a right angle clip.  

CableReady fitting for use when  you want to cover the end of a piece of Straight Run molding   Note: EC200 must be cut in the field to make an end cap.  

CableReady fitting for use when  you want to cover the end of a piece of Straight Run molding   Note: EC200 must be cut in the field to make an end cap.  

CableReady fitting for use when  you want to cover the end of a piece of Straight Run molding   Note: EC200 must be cut in the field to make an end cap.  

CableReady fitting for use when  you want to cover the end of a piece of Straight Run molding   Note: EC200 must be cut in the field to make an end cap.  

CableReady fitting for use when you want to make a 90° inside turn in a corner (such as a wall to wall or ceilling to wall).    

CableReady fitting for use when you want to make a 90° inside turn in a corner (such as a wall to wall or ceilling to wall).    

CableReady fitting for use when you want to make a 90° inside turn in a corner (such as a wall to wall or ceilling to wall).    

CableReady fitting for use when you want to make a 90° inside turn in a corner (such as a wall to wall or ceilling to wall).    

2" x 1" reducing fitting. CableReady fitting for use when you want to reduce 2" molding to 1" molding.    

2" x 1" reducing fitting. CableReady fitting for use when you want to reduce 2" molding to 1" molding.    

2" x 1" reducing fitting. CableReady fitting for use when you want to reduce 2" molding to 1" molding.    

2" x 1" reducing fitting. CableReady fitting for use when you want to reduce 2" molding to 1" molding.    

CableReady fitting for use when you want to branch off in four different directions at 90° angles.    

CableReady fitting for use when you want to branch off in four different directions at 90° angles.    

CableReady fitting for use when you want to branch off in four different directions at 90° angles.    

CableReady fitting for use when you want to branch off in four different directions at 90° angles.    

CableReady fitting for use when you want to create an expansion to cover a hole when entering a lock box, ceiling, or floor.    

CableReady fitting for use when you want to create an expansion to cover a hole when entering a lock box, ceiling, or floor.    

CableReady fitting for use when you want to create an expansion to cover a hole when entering a lock box, ceiling, or floor.    

CableReady fitting for use when you want to create an expansion to cover a hole when entering a lock box, ceiling, or floor.    

CableReady fitting for use when you want to step up or step down from a trim board. Standard offset is 5/8". Fitting can be trimmed.    

CableReady fitting for use when you want to step up or step down from a trim board. Standard offset is 5/8". Fitting can be trimmed.    

CableReady fitting for use when you want to step up or step down from a trim board. Standard offset is 5/8". Fitting can be trimmed.    

CableReady fitting for use when you want to step up or step down from a trim board. Standard offset is 5/8". Fitting can be trimmed.    

2" x 2" x1" Reducing Tee CableReady fitting for use when you want to reduce 2" molding to 1" molding at a 90° angle to the 2" molding    

2" x 2" x1" Reducing Tee CableReady fitting for use when you want to reduce 2" molding to 1" molding at a 90° angle to the 2" molding    

2" x 2" x1" Reducing Tee CableReady fitting for use when you want to reduce 2" molding to 1" molding at a 90° angle to the 2" molding    

2" x 2" x1" Reducing Tee CableReady fitting for use when you want to reduce 2" molding to 1" molding at a 90° angle to the 2" molding    

CableReady fitting for use when you want to cover up to a 4-1/2" hole at the bottom of the bell adapter. The top of the bell adapter fits our SR200 Straight Run.    

CableReady fitting for use when you want to cover up to a 4-1/2" hole at the bottom of the bell adapter. The top of the bell adapter fits our SR200 Straight Run.    

CableReady fitting for use when you want to cover up to a 4-1/2" hole at the bottom of the bell adapter. The top of the bell adapter fits our SR200 Straight Run.    

CableReady fitting for use when you want to cover up to a 4-1/2" hole at the bottom of the bell adapter. The top of the bell adapter fits our SR200 Straight Run.    

CableReady fitting that allows molding to split into three different directions at 90° angles.    

CableReady fitting that allows molding to split into three different directions at 90° angles.    

CableReady fitting that allows molding to split into three different directions at 90° angles.    

CableReady fitting that allows molding to split into three different directions at 90° angles.