1" Fittings

CableReady fitting for use when joining two pieces of molding. This Fitting covers the seam.  

CableReady fitting for use when joining two pieces of molding. This Fitting covers the seam.  

CableReady fitting for use when joining two pieces of molding. This Fitting covers the seam.  

CableReady fitting for use when joining two pieces of molding. This Fitting covers the seam.  

CableReady fitting for use when you want to make a 90° outside turn around a corner (such as two outside walls).  

CableReady fitting for use when you want to make a 90° outside turn around a corner (such as two outside walls).  

CableReady fitting for use when you want to make a 90° outside turn around a corner (such as two outside walls).  

CableReady fitting for use when you want to make a 90° outside turn around a corner (such as two outside walls).  

CableReady fitting for use when you want to make a left or right turn at a 90° angle on a flat surface.  

CableReady fitting for use when you want to make a left or right turn at a 90° angle on a flat surface.  

CableReady fitting for use when you want to make a left or right turn at a 90° angle on a flat surface.  

CableReady fitting for use when you want to make a left or right turn at a 90° angle on a flat surface.  

CableReady fitting for use when you want to branch off in three different directions at 90° angles.  

CableReady fitting for use when you want to branch off in three different directions at 90° angles.  

CableReady fitting for use when you want to branch off in three different directions at 90° angles.  

CableReady fitting for use when you want to branch off in three different directions at 90° angles.  

CableReady fitting for use when you want to cover the end of a piece of Straight Run molding Note: EC100 must be cut in the field to make the end cap.  

CableReady fitting for use when you want to cover the end of a piece of Straight Run molding Note: EC100 must be cut in the field to make the end cap.  

CableReady fitting for use when you want to cover the end of a piece of Straight Run molding Note: EC100 must be cut in the field to make the end cap.  

CableReady fitting for use when you want to cover the end of a piece of Straight Run molding Note: EC100 must be cut in the field to make the end cap.  

CableReady fitting for use when you want to make a 90° inside turn in a corner (such as a wall to wall or ceilling to wall).    

CableReady fitting for use when you want to make a 90° inside turn in a corner (such as a wall to wall or ceilling to wall).    

CableReady fitting for use when you want to make a 90° inside turn in a corner (such as a wall to wall or ceilling to wall).    

CableReady fitting for use when you want to make a 90° inside turn in a corner (such as a wall to wall or ceilling to wall).    

1" x 3/4" Reducing Fitting.   CableReady fitting for use when you want to reduce 1" molding to 3/4" molding.    

1" x 3/4" Reducing Fitting.   CableReady fitting for use when you want to reduce 1" molding to 3/4" molding.    

1" x 3/4" Reducing Fitting.   CableReady fitting for use when you want to reduce 1" molding to 3/4" molding.    

1" x 3/4" Reducing Fitting.   CableReady fitting for use when you want to reduce 1" molding to 3/4" molding.    

CableReady fitting for use when you want to branch off in four different directions at 90° angles.    

CableReady fitting for use when you want to branch off in four different directions at 90° angles.    

CableReady fitting for use when you want to branch off in four different directions at 90° angles.    

CableReady fitting for use when you want to branch off in four different directions at 90° angles.    

CableReady fitting for use when you want to create an expansion to cover a hole when entering a lock box, ceiling, or floor.    

CableReady fitting for use when you want to create an expansion to cover a hole when entering a lock box, ceiling, or floor.    

CableReady fitting for use when you want to create an expansion to cover a hole when entering a lock box, ceiling, or floor.    

CableReady fitting for use when you want to create an expansion to cover a hole when entering a lock box, ceiling, or floor.    

CableReady fitting for use when you want to step up or step down from a trim board. Standard offset is 5/8". Fitting can be trimmed.    

CableReady fitting for use when you want to step up or step down from a trim board. Standard offset is 5/8". Fitting can be trimmed.    

CableReady fitting for use when you want to cover up to a 2 1/2" hole at the bottom of the bell adapter. The top of the bell adapter fits our SR100 Straight Run.    

CableReady fitting for use when you want to cover up to a 2 1/2" hole at the bottom of the bell adapter. The top of the bell adapter fits our SR100 Straight Run.    

CableReady fitting for use when you want to cover up to a 2 1/2" hole at the bottom of the bell adapter. The top of the bell adapter fits our SR100 Straight Run.    

CableReady fitting for use when you want to cover up to a 2 1/2" hole at the bottom of the bell adapter. The top of the bell adapter fits our SR100 Straight Run.