Connectors

These clear RJ45 modular connectors are designed for CAT5e 4-pair solid wire. They are made of a precision manufactured polycarbonate. • Suitable for CAT5e installations • Terminates 24-28 AWG stranded or solid cable • High-Impact Clear Polycarbonate Plugs • Bag of 50

UR2 Connectors (box of 100)

Modular Connector 100 pieces. 4-conductor (RJ11) modular connector end.

Wire Connector- 250 pieces. Crimp type bean wire connectors. Securely splices AWG19-26 solid copper wire.

White keystone insert blank (bag of 100)

This CAT5e RJ45 keystone jack is a snap-in insert for mounting a CAT5e unshielded computer networking cable. Our CAT5e RJ45 keystone inserts are compatible with a number of other manufacturers' plates. All of our structured wiring products adhere to the ANSI/TIA/EIA-568-B specifications (Commercial Building Telecommunications Cabling Standard) and are easy to punch down, clearly labeled and have A/B functionality.   • Rated for CAT5e network applications • Mounts in modular faceplates, surface mount boxes or panels that accept keystone jacks. • Conforms to EIA/TIA T568 A/B Standards • Gold Plated Contacts • Sold Individually

Cat5e punch down insert in white.

Cat5e punch down insert in white.

Cat5e punch down insert in ALMOND.

Cat5e punch down insert in orange.

  Cat5e punch down insert in orange.

Cat5e punch down insert in blue.

Cat5e punch down insert in blue.

Cat5e punch down insert in Yellow.

Cat3 punch down insert in white.

RJ11 punch down insert module in almond.

RJ11 punch down insert module in white.

Connector • Cat5e RJ45 male connector  • Quantity of 100  • Thru holes allow wire pairs to be inserted thru front of connector for faster terminations • Works with solid or stranded wire • Simple one piece design...no bars or liners • FCC compliant, UL rated. Use in category 3, 5, 5E compliant data networks • RoHS compliant • Easy to verify wire sequence

EZ-RJ45® CAT 5/5e Connectors (Box of 100) The patented EZ-RJ45® Connector simplifies twisted pair terminations by allowing the wires to be inserted through the connector and out the front. This allows the technician to easily verify the proper wiring order. Electrical performance of the termination is optimized by pulling the connector down over the cable jacket and seating it tightly in the rear of the connector. Reducing the distance between the wire twists and contacts improves performance! Reduces scrap, no wasted crimps. More reliable, higher performance. Crimp with the patented EZ-RJ45 Crimp Tool...crimps and trims in one cycle. Manufactured in the USA. Patented. • Thru holes allow wire pairs to be inserted thru front of connector for faster terminations. • Works with solid or stranded wire. • Simple one piece design...no bars or liners. • FCC compliant, UL rated. Use in category 3, 5, 5E compliant data networks. • RoHS compliant • EZ to verify wire sequence.

EZ-RJ45® CAT6/5e Connectors (Box of 100) The EZ-RJ45® fully shielded plug, with an internal ground, combines the performance advantage exclusive to the EZ-RJ45® design with the performance advantage inherent to shielded products to provide an unparalleled solution for the market. • EZ-RJ45® design allows the wires to pass through the connector so the twists in each pair can be pulled closer to the contacts than conventional plugs. • Maintaining the twists to the point of termination significantly decreases crosstalk and markedly increases performance. • Fully shielded products provide reduced pair-to-pair crosstalk, alien crosstalk, and considerably improved immunity to noise at all frequencies. • Significantly improve Shannon capacity. • Substantially improve noise immunity at all frequencies, especially above 30 MHz when cable balance starts to significantly degrade. • Category 6 performance per EIA/TIA B.2. FCC compliant, UL rated. RoHS compliant • Max Cable OD: 6.60mm (0.260"), Max Insulated wire OD: 1.041mm (0.041") • For solid round or stranded wire cables. • Made in the USA, Patented • TAA Compliant

50-Pack   The Platinum 202022J is an EZ-RJ45 Shielded Cat5e/6 Connector with external ground. It combines the performance advantage exclusive to the EZ-RJ45 design with the performance advantage inherent to shielded products to provide an unparalleled solution for the market. In applications where NEXT, FEXT and AXT are an issue, using shielded products can be the solution. This connector is designed to work on both Cat5e and Cat6 cables, solid or stranded. The 202022J is FCC compliant and UL and RoHS Compliant. It has a 50 micro Inch gold plate and is manufactured in the United States. The max cable OD is 0.280+-Inches and the max conductor OD is 0.041-Inches. Platinum Tools, founded in 1997, was created based upon two very simple objectives. First, develop, manufacture and source the absolute best possible solutions for preparation, installation and hand termination of wire and cable. Second, implement an operational infrastructure that can deliver these products in an efficient, timely and high quality manner.   • FCC, UL and RoHS Compliant • 50 micro Inch gold plate • For use with Cat5e and Cat6 shielded Cable • External Ground: Maximum cable OD-0.280-Inch • Maximum Conductor OD-0.041-Inch • Manufactured in the USA

The innovative Snag Proof Strain Relief is designed specifically to be crimped with the EZ-RJ45® plugs. The primary strain relief of the plug locks the snag proof strain relief in place so they will not pull off, creating one, integral assembly. Once crimped, this design allows the plug's primary strain relief to relax slightly, preventing the cable pairs from being over compressed. This decrease in stress contributes to achieving peak performance. The tab on the strain relief is designed to extend over the plug's locking tab, making it snag proof when administering patch cords. • Prolong patch cord life • Maintain bend radiuses required for standards compliance • Terminations have a professional finished look • Optimizes electrical performance • No more snags or hang ups causing tangled messes • Easier to unlock the connector when unplugging from jack/port • Made in the USA • UL and RoHS compliant

High Frequency f81 keystone insert. Snap-in tabs make modules easy to insert and remove for adjustments and wiring changes.  

Bridging Clip for 66-IDC Wiring Block Nickel-Plated Brass Construction Dimensions: 1⁄2˝(W) x 1⁄3˝(H) Bag of 100

50-Pair modular 66-IDC wiring block Flame retardant thermoplastic construction Quick-connect 66-IDC terminals Terminates solid copper wire Category-3 24 AWG to Category-6 23 AWG